Quote:
Originally Posted by Red07SSNA
The front "Fascia" from a SS/SC or SSNA will bolt up to an LS/LT. You will need the left and right brackets that go between the bottom of the skirts to the bottom of the fascia -- the SS fascias are about 2 inches lower than the LS/LT fascia (the brakets fill in the gap in the wheel well as well). Also to complete the job you'll need the air dam that goes on the bottom of the radiator support -- the LS/LT air dam does not fit on the SS fascia. If you have the front mud guards they will break-up the visuals so that the SS fascia doesn't look "dumb". If you want the SS/SC fascia you'll also need the chin spoiler -- SSNA fascia doesn't have the slots for the chin spoiler.
|
thanks a lot, that really helps, i started searching the web and found a sit where I think I can buy some of that stuff from, can you tell me which i would need to buy?
GMPartsDirect.com - Find a Item
also, does anyone on here have some before and after pictures of putting a SS bumper on a LS or LT?
that'd be awesome, thanks again