[dduffy2005]

4. Using the regular screwdriver pop off cap on the plastic window surround. Using the 7mm nutdriver remove screw from inside the hole. using the T50 socket and ratchet remove the seat belt from window surround. Pull firmly but gently on surround. there's three pooints at which it is held in place up top and I believe three more around the surround. repeat to other side













5. Using the T20 torx screwdriver remove the hooks in the back




6. All that should be left is the light. The head liner is actually tucked under the door seal other than that, everything should be free. Recline both seats all the way back (It'll make a world of difference when you go to take it out. TRUST ME). Pull down on the head liner from the front driver side of the car and follow the seal. Once it's out of the seal it'll fall down (don't let it! slowly bring it down) you may need to pull the wires for the light off the roof, they're just taped. now remove the connector to the light (I used the screwdriver but be careful not to break it if you do too).