|
PS: This section isnt for questions, its for you to post up how you did something.
Remove the two bolts that hold the headlamp assembly to the bracket(should be 10mm)
Remove the inner upper grille fascia push-pin. (pin closest to headlamp youre removing, lift up on center of pin then remove both pieces)
Pull the lamp forward until the lamp disengages from the lower bracket.
Push the lower inside corner of the headlamp inboard until the outer lens releases from under the outer fender flange.
Rock the headlamp side to side and pull outward.
Disconnect the electrical connector.
Remove lamps from rear of assembly.
__________________
ASE Certified master Technician
ASE Certified Advanced Engine Performance Specialist
GM Certified Technician
GM Mark of Excellence Winner(Top Honors, Engine Repair)
|