|
|||||||
| Engine Mods Talk about Engine Modifications here |
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Yea loose heat shield would be my best guess
__________________
![]() Mod's So Far: AEM CAI, Tinted, Totally Debadged, Custom front SS bumper, Lower Billett Grille, DC Carbon Strut Bar, 2.5 Magnaflow Catback Exhaust and dropped on Progress Springs. Future Mods: In Order - Rimmies, Intake Mainfold Swap, Drilled and Slotted Rotors, Trans Mounts, Short Throw Shifter, Internals, Ingalls Stiffy Torque Dampner |
|
|||
|
Is it a aftermarket catback by any chance?
I had 2 magnaflow catbacks now and had that same noise and turns out it was the resonator that broke both times.
__________________
2006 Black 2.2L CM Lowering Springs AEM Cold Air Intake 2.4L Manifold Swap GMPP Extrude Honed Header GMPP Performance Exhaust DC Sports Strut Bar 18" CR Hype Rims |
|
||||
|
my cat broke where it is flexable (it is the stock cat) and that it where the exhaust is getting out and making the weird noise do i have to replace my entire cat to fix it... if so i am getting a high flow cat
__________________
TEAM BOOST![]() Cobalt SS/SC Rally Yellow Appearance mods: 20% tint, Painted headlight housing, tinted tails Performance mods: Fujita CAI, 2.5" Down pipe with high flow cat, Tenzo R X-Spec muffler, 60Ib injectors, 2.9 pulley, one step colder plugs, and Powerlabs Custom tune |
|
||||
|
mY EXHAUST MAKES A WHISTLE, SOUNDS LIKE A TURBO! sweet UH!! Loose heat shield hole in exhaust???
__________________
dantastic-always in the lead, sending import lovers back to there mommy! 2005 Chevy Cobalt Sedan Victory Red. AEM Cold Air Intake, 15% tint, Chrome Projectors w/halo's. decals! Cars I have owned and are in the bone yard: 1976 Chrysler Cordoba $1,100 1984 Honda Accord $100.00 1986 Chevy Spectrum $200.00 1989 Chevy Beretta $250.00 2004 Chevy Aveo $10,000 (traded in) |
|
||||
|
I figured out where the noise is coming from. It is where the flexable joint at the top of the cat bolts onto the headers at first i thought oh my bolts vibrated loose then i cooled down the pipe to tighten them and i turned my car on put my hand down there and the exhaust was leaking out of the flexable part itself.... new CAT TIME!!!! that part cannot be replaced so i ordered an XTC 2.5" high flow cat from cobalt-addiction.com $279 whit shipping bolts right on no welding (A stock cat from gm is like $500for the supercharged and $400 for the NA cobalts)
__________________
TEAM BOOST![]() Cobalt SS/SC Rally Yellow Appearance mods: 20% tint, Painted headlight housing, tinted tails Performance mods: Fujita CAI, 2.5" Down pipe with high flow cat, Tenzo R X-Spec muffler, 60Ib injectors, 2.9 pulley, one step colder plugs, and Powerlabs Custom tune |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|