Go Back   YourCobalt.Com > Chevy Cobalt > Engine Mods


Engine Mods Talk about Chevy Cobalt Engine Modifications here


Engine Mods Thread, Fujita intake in Chevy Cobalt; i was looking at this Fujita CAI ebay item number 260312996779 i was wondering if any of you guys knew ...


Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-13-2008
cobalt08ls's Avatar
Post Freak
 
Join Date: Sep 2008
Posts: 283
Fujita intake
 
i was looking at this Fujita CAI
ebay item number 260312996779
i was wondering if any of you guys knew if it would fit on my 08 2.2
__________________
Current mods K&N 2.4 SRI 20%tint MSR 045's hyper grey wrapped in 225/40/18 kumho ecasta MX. 1st generation halo projectors with 8000K HID's. IPCW LED tail lights. night hawk LED third brake light. Debadged rear bowtie painted front bowtie black. 08 SS Flat black painted grille. Sony CDX-GT630UI headunit Alpine SPS-600, Alpine SPR-69C 6x9 speakers

  #2  
Old 11-13-2008
B-Low187's Avatar
Veteran
 
Join Date: Jan 2006
Location: Latrobe, PA
Posts: 725
im not sure if some of the 08's have the SAI on them or not like some of the 06's and 07's did. but if your car doesnt have that then yes it will fit
__________________

06 Cobalt LS-Black, Custom Blue Powder Coated DC Strut Bar & Valve Cover, NGK Iridium Spark Plugs, K&N Short Ram Typhoon Intake, Z Spec LightWeight Crank Pulley, 2.4 Intake Manifold Kit, GM Extruded Honed Exhaust Manifold, B&M Shift Plus, Eibach Sportlines, Custom 2.5" Magnaflow Exhaust From The Manifold Back, Exterior Undergoing Overhaul
  #3  
Old 11-13-2008
cobalt08ls's Avatar
Post Freak
 
Join Date: Sep 2008
Posts: 283
yeah i dont know. if i wana get that one now. because i found a weapon R intake
i dont know much about them though
does any one know anything bout em
__________________
Current mods K&N 2.4 SRI 20%tint MSR 045's hyper grey wrapped in 225/40/18 kumho ecasta MX. 1st generation halo projectors with 8000K HID's. IPCW LED tail lights. night hawk LED third brake light. Debadged rear bowtie painted front bowtie black. 08 SS Flat black painted grille. Sony CDX-GT630UI headunit Alpine SPS-600, Alpine SPR-69C 6x9 speakers

  #4  
Old 11-13-2008
juggalodgaf's Avatar
Newbie
 
Join Date: Aug 2008
Location: beaverton
Posts: 37
Send a message via AIM to juggalodgaf
becareful buying it off of ebay tho i did that and every hose clamp and even the air filter were the wrong size the tubing fit fine but the rubber between i had to fight with to get on the car
  #5  
Old 11-13-2008
B-Low187's Avatar
Veteran
 
Join Date: Jan 2006
Location: Latrobe, PA
Posts: 725
im not to sure about the Weapon R. most of the people on here either have the injen, k&n or a custom intake they made themselves.

i personally have the k&n, injen is another good choice. but you have to figure out if your car has the SAI on it or not. that will determine what intake you can get
__________________

06 Cobalt LS-Black, Custom Blue Powder Coated DC Strut Bar & Valve Cover, NGK Iridium Spark Plugs, K&N Short Ram Typhoon Intake, Z Spec LightWeight Crank Pulley, 2.4 Intake Manifold Kit, GM Extruded Honed Exhaust Manifold, B&M Shift Plus, Eibach Sportlines, Custom 2.5" Magnaflow Exhaust From The Manifold Back, Exterior Undergoing Overhaul
  #6  
Old 11-13-2008
OBZ's Avatar
OBZ OBZ is offline
Moderator
 
Join Date: May 2006
Location: S.L.C. UT.
Posts: 1,638
Weapon R Secret Weapon CAI... anyone know about it?

K&N has a place for SAI if you have it
__________________


"A wise man speaks because he has something to say,
A fool speaks because he has to say something"


March 2008 in yourcobalt.com calendar
  #7  
Old 11-13-2008
cobalt08ls's Avatar
Post Freak
 
Join Date: Sep 2008
Posts: 283
yeah i read that the weapon r was poorley designed and all that. i just saw it on nopi.com because it was added in the past week. but i think ill get a k&n injen or AEM but not sure
also i have no clue at all if i have a SAI
-----Added 13 Nov 2008 at 09:28:01-----
also isn't the weapon r mounted so the filter is going down or something and all you see is the piping. i just want a decent intake where it isn't mounted weird and mounted do i can see the filter to change it whenever changing is needed. im somewhat thinking to go with the K&N. but not sure
so let me know what one is best and ill want to get
__________________
Current mods K&N 2.4 SRI 20%tint MSR 045's hyper grey wrapped in 225/40/18 kumho ecasta MX. 1st generation halo projectors with 8000K HID's. IPCW LED tail lights. night hawk LED third brake light. Debadged rear bowtie painted front bowtie black. 08 SS Flat black painted grille. Sony CDX-GT630UI headunit Alpine SPS-600, Alpine SPR-69C 6x9 speakers

  #8  
Old 11-13-2008
cobalt08ls's Avatar
Post Freak
 
Join Date: Sep 2008
Posts: 283
also isn't the weapon r mounted so the filter is going down or something and all you see is the piping. i just want a decent intake where it isn't mounted weird and mounted do i can see the filter to change it whenever changing is needed. im somewhat thinking to go with the K&N. but not sure
so let me know what one is best and ill want to get
__________________
Current mods K&N 2.4 SRI 20%tint MSR 045's hyper grey wrapped in 225/40/18 kumho ecasta MX. 1st generation halo projectors with 8000K HID's. IPCW LED tail lights. night hawk LED third brake light. Debadged rear bowtie painted front bowtie black. 08 SS Flat black painted grille. Sony CDX-GT630UI headunit Alpine SPS-600, Alpine SPR-69C 6x9 speakers

  #9  
Old 11-14-2008
B-Low187's Avatar
Veteran
 
Join Date: Jan 2006
Location: Latrobe, PA
Posts: 725
well this is just my opinion and really depends on what you want. the k&n is only a SRI and is made by a great reliable company. i have it and love it and i believe its the only intake thats made for cobalts with or without the SAI. if you dont have it you just cap off the spot for it.

the injen is another great choice because for the same price, you can run it either as a SRI or a CAI.

and the aem is made by another decent company but i believe its only a CAI

as far as telling wether yours has the SAI system or not, heres how you can tell. it will have a big extra line coming off your stock airbox, and youll have a spot on top of your exhaust manifold in the center of it for the air valve. if your still unsure post a pic of your intake and we can tell you
__________________

06 Cobalt LS-Black, Custom Blue Powder Coated DC Strut Bar & Valve Cover, NGK Iridium Spark Plugs, K&N Short Ram Typhoon Intake, Z Spec LightWeight Crank Pulley, 2.4 Intake Manifold Kit, GM Extruded Honed Exhaust Manifold, B&M Shift Plus, Eibach Sportlines, Custom 2.5" Magnaflow Exhaust From The Manifold Back, Exterior Undergoing Overhaul
  #10  
Old 11-14-2008
cobalt08ls's Avatar
Post Freak
 
Join Date: Sep 2008
Posts: 283
heres the pic of the intake



would you be able to send me links of K&n or injen that will work for my car which is a 08 because i dont wana buy the wrong thing
__________________
Current mods K&N 2.4 SRI 20%tint MSR 045's hyper grey wrapped in 225/40/18 kumho ecasta MX. 1st generation halo projectors with 8000K HID's. IPCW LED tail lights. night hawk LED third brake light. Debadged rear bowtie painted front bowtie black. 08 SS Flat black painted grille. Sony CDX-GT630UI headunit Alpine SPS-600, Alpine SPR-69C 6x9 speakers

Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:06 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.0
RacingSolution.com - Chevy Cobalt Parts - Chevy Cobalt Parts - Hyundai Genesis Forum