Port Work

[B-Low187]

I work at slowboy racing inc. formally of indiana PA. Now in Sanford FL baby!!!! i do port work on cylinder heads, manifolds, turbos, etc.. for them.

so i am offering my porting services on the side to anyone considering getting some port work done

On the side we offer these services:
- Porting Throttle Bodies
Prices are $95 + Shipping for just port work, and $125 + Shipping for port work and milling the throttle shaft and shortened throttle blade screws





- Cleaning up the plastic intake manifolds
prices for this are $ 50 + shipping ( we dont actually port it because its plastic but we smooth it up and remove all excess plastic hangin inside it

At the shop we can offer these porting services:
- Porting exhaust manifolds $75
- Porting cylinder heads
Stage 1 $250 (just the bowls get ported)
Stage 2 $350 (the bowls get ported plus the runners get polished)
Stage 3 $450 (full out port and polish)
- Porting of superchargers $200
- Porting of S/C and LSJ intake mani combo $275
- Porting of LSJ intake manifolds $125
- Porting of turbos $90

-----------------------------------------
And for the serious motor heads we can do the following at the shop:
- Complete high performance engine builds (with or without cylinder head work) *price to be determined after talking to sales guy*
- High performance cylinder heads ( wether you just want a port & polish with no head internals or cams, or you want a full race head including it all) * final price to be determined after talking to sales guy*
- We can order pretty much any part ( internals and possibly some bolt ons but we dont carry them in stock right now)
*price to be determined upon talking with sales guy*
- We do installs

Cylinder Head Work:
- Clean and glass bead head $
- Competition valve job $
- Competition valve job 1mm over $
- Head Surfacing $
- Install Valve Guides $

Block Work:
- Clean/Disassemble $
- Bore & Hone $
- Surfacing $

Misc Work:
- Balance Rotating Assembly $


Slowboy Racing

thanks

[P1mpsy0r1c3]

hey i already talked to you about this!

Cant wait!

[B-Low187]

bump

[B-Low187]

bump

[P1mpsy0r1c3]

hey man how much did you say it was to port my tb?

[B-Low187]

pm sent

[njg5gt]

how much? i know its job dependant, but a ball park would be cool

[Chester]

Ahhh ... Slowboy Racing has some nice stuff... My friend got his Intake Manifold for his TSI from you guys

[B-Low187]

TB's are roughly $110 shipped. now this also may vary due to further away locations. we will soon have a few cores for each model so people dont have to be without there car for a few days

cant really throw out estimates for cylinder port since most castings will vary but thats usually between $300 and $400

and thanks chester

[08sport]

do u no where i can get a ne metal intake bc i have a 2.4 and i no that the intakes for them are plastic and i want a metal can u help?