Help Installing New Head Unit on Pioneer Package - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Audio/Video Talk about Chevy Cobalt Audio/Video and other mobile electronics here

 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 10-01-2009, 08:11 PM Thread Starter
Newcomer
 
Join Date: Sep 2009
Posts: 5
Help Installing New Head Unit on Pioneer Package

Ok so I'm pretty new to replacing factory units so if this question has already been answered, sorry. I have a 2005 cobalt with the pioneer sound package and I recently bought the Pioneer AVH-P3100DVD head unit. I hooked everything up with the wiring harness and all of the speakers work fine except the 2 tweeters mounted by the side mirrors. They just put out static. I went back and checked all my connections and they're all fine. Any suggestions?
ktron7x is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 10-02-2009, 07:33 PM Thread Starter
Newcomer
 
Join Date: Sep 2009
Posts: 5
I think I've kind of figured it out with the help of someone I know. There is a little bit of sound coming through and he said something about a high pass resistor or something. But I think the problem is that too much high is coming through. Does this make any sense?
ktron7x is offline  
post #3 of 5 (permalink) Old 10-02-2009, 08:07 PM
Say What again!
YourCobalt of the Month Winner
YourCobalt.com Premium Member


 
MP81's Avatar
 
Join Date: Sep 2009
Location: Washington Township, Michigan
Posts: 5,983
Garage
Are they hooked up to crossovers?

1986 Chevrolet Camaro IROC-Z - Wrecked/Sold
1998 Chevrolet Cavalier - Wrecked/Donated
2007 Chevrolet Cobalt LT - M62 Supercharger, Ported Throttle Body, 42 lb/hr Injectors, Intense 2.9" Pulley, Cobra Heat Exchanger, SS/TC Exhaust, TTR Engine and Trans Mounts, Trifecta Tune, ZZP Header and Downpipe, '08+ FE5 Struts/Shocks, SSC Springs, FE5 Control Arms, SS/SC Front Swaybar, Powell Hardcore Rear Swaybar, 18" MSR 045s, Dunlop ZIIs, Nightshaded Tails/Side Markers, Shorty Antenna, Black Bowties, Black Grilles, Black Headlights, Dual JL 12" w1v2 Subs, A/D/S Front/Rear Speakers, Pioneer 7" Touchscreen, G85 Recaros, Leather Rear Seats, 160 MPH Cluster.
2014 Chevrolet Cruze Diesel - 17" MSR 013s, Black Bowties, Black Tails, UR Rear Lower Bar
1981 Chevrolet Camaro Z28 - JVC Ribbon Tweeters, SEAS Mids, Pyle Woofers, Kenwood Tape Deck, Zapco Amp/Equilizer, Ceramic-Coated Longtubes, 2.5" Pypes Stainless Exhaust, Bilstein B6 Shocks, GW U/L Control Arms, Hotchkis Springs Sway Bars, DD HDX Cluster
2017 Chevrolet Volt LT - Black Bowties
MP81 is offline  
 
post #4 of 5 (permalink) Old 10-03-2009, 08:02 PM Thread Starter
Newcomer
 
Join Date: Sep 2009
Posts: 5
I'm not sure. How could I check?
ktron7x is offline  
post #5 of 5 (permalink) Old 10-07-2009, 11:03 AM
Forum God


 
BboyTaktix's Avatar
 
Join Date: Oct 2009
Location: CANADA! Montreal (party city), Quebec
Posts: 3,229
to check you'll have to follow the wire from the tweeters. They either go straight to your radio (no crossover) or they go through small boxes and then from the box to the deck. Those in-between boxes would be the crossovers. (unless the stock head unit had crossovers built in but i highly doubt it). If there are no crossovers you might need to get some. But there are some tweeters that don't need, i have a pair that do have them and a pair that doesn't. Check first if they have or not.
BboyTaktix is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome