sup any good ideas for my cobalt anyone???? - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Chevy Cobalt Owners Lounge General Chevy Cobalt discussion

View Poll Results: hows my car look?
straight 7 77.78%
thats wats sup 1 11.11%
dammmnnn thats new 1 11.11%
i want it can i have it? 0 0%
Voters: 9. You may not vote on this poll

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 17 (permalink) Old 01-29-2009, 10:14 AM Thread Starter
Newcomer
 
Join Date: Jan 2009
Posts: 13
sup any good ideas for my cobalt anyone????

This is wat it came like

this is wat it looks like now

im wantin to put lambo doors on it for sure. also me and my buddy are about to take the racing strip off the side and all the emblems off it. except you know ill keep the chevy symbols. but we are paintin them black so that way my car will all blacked out for sure.also we are tinting out all the lights in the back. some told me to do a cool air intak and maybe even a turbo. but i am more about the way it looks i cant afford anymore tickets. soo does anyone have any ideas wat could make this cobalt look real sick?
stealthbomber is offline  
Sponsored Links
Advertisement
 
post #2 of 17 (permalink) Old 01-29-2009, 12:21 PM
Cobalt Specialist
 
B-Low187's Avatar
 
Join Date: Jan 2006
Location: FL
Posts: 1,119
paint the inside of your headlights, lower it some, and cut off the mud flaps

looks good though
B-Low187 is offline  
post #3 of 17 (permalink) Old 01-29-2009, 01:37 PM
Cobalt Specialist


 
cobaltinator's Avatar
 
Join Date: Sep 2007
Location: Destin Florida
Posts: 1,127
Garage
Send a message via Yahoo to cobaltinator
Throw a kit on it, lower it, system, get like me pretty much ahaha... j/k oh and throw some police issue whellen strobe on it!!!!! I got the 6 channel kit and damn it looks nice at night

cobaltinator is offline  
post #4 of 17 (permalink) Old 01-29-2009, 02:09 PM
Cobalt Specialist
 
Join Date: Aug 2007
Location: Long Island, New York
Posts: 1,115
definatly needs to be lowered, but pease do yourself a giant favor, and dont put lambo doors on it. i mean seriously come on.
http://www.allfordmustangs.com/photo...Played-Out.jpg

2007 Black LT coupe
35% Tint all around - Completly debadged - Side Moldings Removed
KICKER ZX 650 RMS interior amp - KICKER ZX1000 RMS Sub Amp
1 KICKER 12" L7 - All new pioneer interiors - Pioneer Avic Z2 W/ GPS
Rockford 1 Farad capcitor - Trunk, Doors, and Rear deck Dynamated - PS2 with guitar hero
Blue footwell neons - Two Alpine type S Tweeters

Engine mods:
K&N air filter
^^^RIP^^^
2006 TBSS!
xyankees214x is offline  
post #5 of 17 (permalink) Old 01-29-2009, 03:59 PM
OBZ
Staff AlumniDedicated


 
OBZ's Avatar
 
Join Date: May 2006
Location: S.L.C. UT.
Posts: 3,006
Just a few suggestions.. Drop it, lose the stripe, tint your tail lights and side markers and paint the insides of your headlights. Then you will have a pretty clean ride. If you like the lambo doors get them. Do what YOU think is cool



"A wise man speaks because he has something to say,
A fool speaks because he has to say something"
OBZ's showoff thread!
OBZ is offline  
post #6 of 17 (permalink) Old 01-30-2009, 12:21 PM Thread Starter
Newcomer
 
Join Date: Jan 2009
Posts: 13
when u say paint the inside of the headlights wat Does that mean. Like tint them? And yeah the strip is going and so are all the letters on it. The chevy symbol is gettin painted black so that way everything will be black on black. So everyone thinks it should be lowered cause all my boys think so too. But i want twentys.but i do like the idea of being lowered in an 08. Also wat do you all Know about gettin the car wet sanded and than buffed.and it does have two db drive tens with a 600 wat db speed series amp.its pretty good for tens most people think they are twelves untill i show them to them.
stealthbomber is offline  
post #7 of 17 (permalink) Old 01-30-2009, 12:27 PM
Cobalt Specialist


 
cobaltinator's Avatar
 
Join Date: Sep 2007
Location: Destin Florida
Posts: 1,127
Garage
Send a message via Yahoo to cobaltinator
No take the headlights apart and paint the chrome areas to color match exterior. Why wetsand a perfectly good paint job??? Just wax and buff it out. You wet sand and it takes layers of clear off......

cobaltinator is offline  
post #8 of 17 (permalink) Old 01-30-2009, 05:13 PM
 
Join Date: Oct 2008
Posts: 292
way to setup a vote to were there is no bad answers... point blank, i don't dig it and its the wheels that make the car and those wheels just take away from the look of the car imo.

i'd follow the rest of these guys advice as far a appearance modifications, however if your going to roll 20's i wouldn't bother with performance modifications unless your jsut doing them for looks.

just my .02 c.
knoxbox is offline  
post #9 of 17 (permalink) Old 02-01-2009, 05:16 PM Thread Starter
Newcomer
 
Join Date: Jan 2009
Posts: 13
dude was talking bout wet sandin i guess cause there are some pretty bad scratches on the hood i think but they arent to bad i guess.ive never really known too much about the wet sand process. so probably buffing it out will do just fine. and also im new to this site and i had my friend set the poll up cause i didnt really care about the poll to be honest i think my car looks straight thats why i told him to make that the first option. and i decided i do want to lower it but how much should it cost do u think so i dont get screwed over? but since its an automatic wat could i even do to the engine. i always thought people really only mess with engines that are 5 or 6 speeds.but yeah i am pretty much just about the looks of the car.
stealthbomber is offline  
post #10 of 17 (permalink) Old 02-01-2009, 08:59 PM
Contributor
 
ConwayCobalt's Avatar
 
Join Date: Oct 2008
Location: Conway, AR
Posts: 298
My car is an automatic. The engine mods I have done have worked out pretty good.

2007 LT 2.2
MODS:
GMPP Air Intake * GMPP Extrude Honed Manifold * GMPP Cat-Back Performance Exhaust * Vibrant D/P * Jet Stage 2 Module
MOBIL 1 Synthetic Oil * DC Sport Strut Tower Brace * Color Matched Mirror Covers * EuroAntenna * 30-15 3M FX Tinting
Bridgestone Potenza Pole Position RE960AS on Premium Wheels

Future MODS:
2.4 Intake Manifold Conversion * 2.4 TB * TUNE
ConwayCobalt is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome