Could Somebody Post a Pic of This? - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Chevy Cobalt Owners Lounge General Chevy Cobalt discussion

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 10-16-2010, 09:18 AM Thread Starter
Newcomer
 
Join Date: Oct 2010
Posts: 23
Could Somebody Post a Pic of This?

First, thanks for the help so far with my "issues". They are being taken care of at the dealer hopefully! The power steering recall has been done also. Just a few small ones left and the car should be complete and ready for my 16 yr old grandson!

This got lost in the speedometer topic so will post here also----

Could someone post a pic for me? I need a closeup pic of the mount for the air cleaner on the farthest right side (looking at it from the front) where there is a gap next to the engine dust/shield cover. There is a bracket and a rubber washer and I am missing the bolt or pin or whatever goes there.
Thanks for your help
Genestoy is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 10-17-2010, 05:38 AM
Forum Regular
 
nerdmanpap's Avatar
 
Join Date: Jan 2010
Posts: 197
Garage
post a picture of what you are looking at, and i will take a picture of what mine looks like.

nerdmanpap is offline  
post #3 of 12 (permalink) Old 10-17-2010, 06:17 AM Thread Starter
Newcomer
 
Join Date: Oct 2010
Posts: 23
The forum won't let me post a pic yet? Is there a post number before you are allowed?
Genestoy is offline  
post #4 of 12 (permalink) Old 10-17-2010, 06:20 AM
Forum Regular
 
nerdmanpap's Avatar
 
Join Date: Jan 2010
Posts: 197
Garage
Quote:
Originally Posted by Genestoy View Post
The forum won't let me post a pic yet? Is there a post number before you are allowed?
check your private messages


Last edited by nerdmanpap; 10-17-2010 at 06:26 AM.
nerdmanpap is offline  
post #5 of 12 (permalink) Old 10-17-2010, 09:08 AM
Forum Regular
 
nerdmanpap's Avatar
 
Join Date: Jan 2010
Posts: 197
Garage
here is gene's picture of what he is looking at and needs help with:



I've got an aftermarket intake installed on my car, so me taking a picture of the right side of my intake is useless to him. anyone with a stock cobalt able to post a picture for him?

---------- Post added at 11:08 AM ---------- Previous post was at 11:05 AM ----------

as far as i can remember from my injen CAI install, the only thing really holding that stock intake on was the metal clamp around the throttle body inlet. anyone else able to confirm or deny my memory?

nerdmanpap is offline  
post #6 of 12 (permalink) Old 10-17-2010, 09:29 AM
Contributor


 
dondiego's Avatar
 
Join Date: Jun 2009
Location: Boston
Posts: 498


Here is my 2009. It's stock.



Shorty Antenna, Painted Calipers, SAI K&N Intake, B&G Lowering Springs, FE5 Shocks and Struts, Moog End Links, Moog Tie Rod Ends, Polk Audio DXi650 Speakers - front and back.
dondiego is offline  
post #7 of 12 (permalink) Old 10-17-2010, 09:41 AM
Forum Regular
 
nerdmanpap's Avatar
 
Join Date: Jan 2010
Posts: 197
Garage
looks like a cheesy plastic pin holding it down. I may have mine laying around somewhere if you want it. I wont be able to check until thanksgiving though as i have all my old stock parts stored at my folks place while i'm in college

nerdmanpap is offline  
post #8 of 12 (permalink) Old 10-17-2010, 10:02 AM Thread Starter
Newcomer
 
Join Date: Oct 2010
Posts: 23
Thanks guys, I am going to a dealer tomorrow anyway and will get one, looks like one of those cheesy plastic push-pull type snap in pins they use all over the place but a larger one
Genestoy is offline  
post #9 of 12 (permalink) Old 10-17-2010, 10:45 AM
Not justice...Punishment
Staff Alumni
YourCobalt.com Premium Member


 
Will mpg's Avatar
 
Join Date: Sep 2009
Location: Brownsville, TN U.S.A.
Posts: 3,829
Garage
As long as the dealership does not try to charge you $56,358.00 for it. I broke the plastic rivet in my seatbelt that stops the buckle from sliding all the way down when not hooked... They wanted $20.00 for a plastic rivet. I laughed at the guy and told him never mind.

I found one at an autoparts store for $ .87

Will mpg is offline  
post #10 of 12 (permalink) Old 10-21-2010, 05:47 PM
YourCobalt.com Premium Member


 
finnscobalt's Avatar
 
Join Date: Mar 2009
Location: Lower Alabama
Posts: 2,473
Send a message via Yahoo to finnscobalt
Quote:
Originally Posted by Will mpg View Post
As long as the dealership does not try to charge you $56,358.00 for it. I broke the plastic rivet in my seatbelt that stops the buckle from sliding all the way down when not hooked... They wanted $20.00 for a plastic rivet. I laughed at the guy and told him never mind.

I found one at an autoparts store for $ .87
I got tired of breaking those and getting ready to put real metal snaps in the place of those cheap plastic POS's.



sig pic courtesy of GBALT05
finnscobalt is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome