2010 Chevy Cobalt no start - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Chevy Cobalt Owners Lounge General Chevy Cobalt discussion

LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 08-21-2017, 08:29 AM Thread Starter
Join Date: Aug 2017
Posts: 3
2010 Chevy Cobalt no start

I have a 2.2 in it that I have recently replaced the timing chain on. I also did the head in order to check the valves. I got it all put back together and now it won't start. Cranks good but won't fire up. I have spark and fuel pressure. I am sure I got the timing lined up correctly. It said engine power reduced before I cleared the codes. I have cam solenoid codes but that was caused from metal shavings in the oil and shouldn't affect startup? I also cleaned them. I don't know why it won't fire. I have read a lot about the crankshaft position sensor but I have no codes indicating that. I am tight on cash after the repair and need to get this figured out without slapping tons of parts on. Is there a reason I need a high end scanner to get it running?
Matt Burt is offline  
Sponsored Links
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome