Connecting Backup Camera Wiring - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Electrical Electrical DIY/How-to's

LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 03-22-2019, 05:58 AM Thread Starter
Join Date: Mar 2019
Posts: 1
Connecting Backup Camera Wiring

I did reference but its closed and doesn't offer enough details.

I have a license plate style rear camera I am trying to wire to 2010 Cobalt.
I can't figure out the easiest way to wire from the license plate to the tail light.
I removed the plastic cover ( see screenshot below) hoping to reveal a way to the wires but there is none, just the inner frame housing of the car with no way to get to the wiring on the other side where the license is at.
If I try to trace the wiring for the bulb by the plate it seems to run along the bumper to the left side of car.
I really don't want to remove the bumper and don't want to drill unless everyone agrees there is no other option.

Image of plastic cover IMAG0221.jpg Photo by Coby007 | Photobucket
jsunsnow is offline  
Sponsored Links

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Chevrolet Cobalt Reverse/Backup LED Bulbs! Plug & Play! Increase Safety & Appearance! Diode Dynamics Diode Dynamics 2 04-30-2018 02:11 PM
Cree LED Backup Lights, What Wattage? massguy Interior & Exterior Styling 8 08-09-2013 08:03 PM
How to Wire Backup Camera into Trunk? Xqtftqx Electrical 9 09-25-2012 05:53 PM
Speaker Connecting.. xEPICMANx Audio/Video 12 09-08-2012 10:04 AM
Connecting Rods acnelson4 Engine Mods 8 06-04-2010 01:42 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome