Glowbalt's SC BUILD THREAD - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Engine Mods Talk about Chevy Cobalt Engine Modifications here.

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 166 (permalink) Old 08-01-2010, 06:08 AM Thread Starter
Forum God


 
Glowbalt's Avatar
 
Join Date: Jul 2009
Posts: 3,545
Garage
Glowbalt's SC BUILD THREAD

Well guys I finally kicked it off with my first big purchase so it's official. any tips/links would be greatly appreciated.


RED = PARTS ACQUIRED
BLUE=PARTS ON HAND
GREEN=PARTS NEEDED

-M62 Supercharger
-2.8” GM STAGE 2 PULLEY/HUB
-INNOVATE LC-1 WIDEBAND
-LSJ Throttle Body
-LSJ Intake Manifold
-Stage 2 Belt (One rib cut off)
-Siemen's 60lb Injectors w/new harness
-Intake Manifold-SC Gasket
-TB-SC Gasket
-TB Hard Vac Hose
-Glowshift boost gauge
-LSJ INTAKE
-H/E Pump Bracket
-LSJ Lower Intake Manifold Brace
-OTTP Heat Exchanger
-LSJ Belt Tensioner
-LSJ Idler Pulley
-LSJ Alternator Bracket (PN 12584365)
-LSJ Washer Reservoir (PN 22729469)
-LSJ 1 Bar MAP Sensor
-LSJ Brake Booster Hose
-A-Pillar Gauge Pod (2 Pods)
-Extra Coolant for Engine (1 Gal Prestone 50/50 Dexcool, 1 Bottle of Water Wetter)
-Coolant for H/E Circuit (1 Gal Prestone 50/50 Dexcool)
-LSJ Upper Radiator Hose (PN 15247280)
-12' of ” Heater Hose
-Intake Manifold-Head Gasket
-H/E Bracket Insulator (PN 12594387)
-H/E Pump Connector
-LSJ Throttle Body Connector (8-Pin)
-By-pass Elbow Hose (Used ” Vacuum Hose)
-Vac hose for Valve cover to air intake (Cannot remember size)
-Multiple 90 Bends for ” Heater Hose (Use as needed)
-Multiple Straight extensions for ” Heater Hose (Use as needed)
-Washer Hose + “butt connectors”
-Hose Clamps
-Trifecta Tune

My list of bolts (courtesy of Gene):

• GM Bolts Needed
- 11516342 – LSJ Intake Manifold Mount To Block Bolts -(M8 X 1.25 x 60) (Qty 2)
- 11589214 – LSJ Supercharger to Intake Manifold Bolts (4)
- 11900248 – LSJ TB To SC Bolts (4)
• Standard Bolts Needed (Not GM)
- LSJ 1 Bar MAP To Intake Manifold M6 x 1.0 x 25 (Qty 1)
- LSJ Intake Manifold Mount Bracket To Intake Manifold M10 X 1.50 x 50 (Qty 1)
- LSJ Rear IC Pump Bracket To Intake Manifold Mount M8 X 1.25 X 25 –
- LSJ Front IC Pump Bracket To Rear IC Pump Bracket M8 X 1.25 X 35 – (Qty 2)
- LSJ Idler Pulley To Block M10 X 1.50 x 75 (Qty 1)
- LSJ Idler Pulley To Alternator Bracket M8 x 1.25 X 25 (Qty 1)
- LSJ Intake Manifold To Block M6 x 1.0 X 75 (Qty 2)
- LSJ Alternator Bracket To Block M8 X 1.25 X 130 (Qty 3)
- LSJ SC Bypass Valve To SC M8 X 1.25 X 20 (Qty 2)
- LSJ Lower Tensioner To Bracket M8 x 1.25 x 35
- LSJ Upper Tensioner To Bracket M8 X 1.25 x 40… not standard bolt though. Has to be metric hex socket bolt.
- LSJ Intake Manifold Bolts M6 X 1.00 x 25 (Qty 4)


SOLD! 2.2 TURBOCHARGED. GT28 TURBO, 60# INJECTORS, WISECO PISTONS, EAGLE CONNECTING RODS, ZZP 3" DOWNPIPE, PACESETTER EXHAUST, K&N INTAKE, CUSTOM COLDSIDE PIPING, DEJON HOTSIDE PIPING, 2.4 INTAKE MANIFOLD,2.4 THROTTLE BODY, TRIFECTA TUNED.


Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Last edited by Glowbalt; 10-21-2010 at 04:18 PM.
Glowbalt is offline  
Sponsored Links
Advertisement
 
post #2 of 166 (permalink) Old 08-01-2010, 06:21 AM
Cobalt Specialist
 
BlueFlash's Avatar
 
Join Date: Mar 2010
Location: Ohio
Posts: 1,056
Garage
ooooooooohhhhhhhhhh yyyyyyyyeeeeeeaaaaaaaaaaaaahhhhhhhhhhh supercharged


2006 Laser Blue LS - Wrecked
BlueFlash is offline  
post #3 of 166 (permalink) Old 08-01-2010, 06:40 AM
Forum Regular
 
kunkerdown's Avatar
 
Join Date: Jun 2010
Location: Southern MN
Posts: 126
Awesome to hear. Hopefully your acquiring goes quickly and stays within budget. Good luck.

"Got a hot girl you're less than friends with? That means she's a stranger, stop staring creepo."
kunkerdown is offline  
 
post #4 of 166 (permalink) Old 08-01-2010, 07:36 AM
Veteran
 
BlackLS Street's Avatar
 
Join Date: Dec 2009
Location: Elberton, Georgia
Posts: 680
Garage
Send a message via Yahoo to BlackLS Street Send a message via Skype™ to BlackLS Street
Too big of a list for me...
I couldn't keep track of everything lol
BlackLS Street is offline  
post #5 of 166 (permalink) Old 08-01-2010, 07:44 AM
Contributor
 
Neddy06SS's Avatar
 
Join Date: Jun 2010
Location: DC Metro Area
Posts: 274
Send a message via Yahoo to Neddy06SS
I have wondered why Procharger, Vortech or Magnuson has not offered a kit for our cars yet....

2006 Cobalt SS 2.4L Auto
Stock 1/4: 16.315 @ 83.65 (104 degree day)
Facebook: rmikek
Neddy06SS is offline  
post #6 of 166 (permalink) Old 08-01-2010, 08:00 AM Thread Starter
Forum God


 
Glowbalt's Avatar
 
Join Date: Jul 2009
Posts: 3,545
Garage
Quote:
Originally Posted by BlackLS Street View Post
Too big of a list for me...
I couldn't keep track of everything lol
but if you really look at it it's just little simple things and bolts


SOLD! 2.2 TURBOCHARGED. GT28 TURBO, 60# INJECTORS, WISECO PISTONS, EAGLE CONNECTING RODS, ZZP 3" DOWNPIPE, PACESETTER EXHAUST, K&N INTAKE, CUSTOM COLDSIDE PIPING, DEJON HOTSIDE PIPING, 2.4 INTAKE MANIFOLD,2.4 THROTTLE BODY, TRIFECTA TUNED.


Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Glowbalt is offline  
post #7 of 166 (permalink) Old 08-01-2010, 08:03 AM
Contributor
 
Neddy06SS's Avatar
 
Join Date: Jun 2010
Location: DC Metro Area
Posts: 274
Send a message via Yahoo to Neddy06SS
its so hard to take any post you do seriously with that crazy chic in your sig. lol

2006 Cobalt SS 2.4L Auto
Stock 1/4: 16.315 @ 83.65 (104 degree day)
Facebook: rmikek
Neddy06SS is offline  
post #8 of 166 (permalink) Old 08-01-2010, 08:04 AM
Veteran
 
ndbalt07's Avatar
 
Join Date: Nov 2008
Location: North Dakota
Posts: 611
Garage
Send a message via MSN to ndbalt07 Send a message via Skype™ to ndbalt07
sub'd

07' LS 5 spd, bullseye S256 @ 17 psi wut?!, E85!!!, wiseco 8.9:1 pistons, eagle rods, spec stage 3 clutch, TTR motor and tranny mounts, ARK sts, Magnaflow catback, tinted windows, B&G coilovers w/ adjustable camber plates, front bowtie painted black, and ETX ME-2 rims wrapped in 235/40/18 Nitto invos.
ndbalt07 is offline  
post #9 of 166 (permalink) Old 08-01-2010, 08:06 AM
I cut stuff
YourCobalt of the Month Winner
YourCobalt.com Premium Member


 
blazerlow's Avatar
 
Join Date: Aug 2009
Location: MN
Posts: 6,238
Garage
blazerlow is offline  
post #10 of 166 (permalink) Old 08-01-2010, 08:07 AM Thread Starter
Forum God


 
Glowbalt's Avatar
 
Join Date: Jul 2009
Posts: 3,545
Garage
Quote:
Originally Posted by Neddy06SS View Post
its so hard to take any post you do seriously with that crazy chic in your sig. lol
haha...

---------- Post added at 08:07 AM ---------- Previous post was at 08:07 AM ----------

Quote:
Originally Posted by ndbalt07 View Post
sub'd
wwooppp!


SOLD! 2.2 TURBOCHARGED. GT28 TURBO, 60# INJECTORS, WISECO PISTONS, EAGLE CONNECTING RODS, ZZP 3" DOWNPIPE, PACESETTER EXHAUST, K&N INTAKE, CUSTOM COLDSIDE PIPING, DEJON HOTSIDE PIPING, 2.4 INTAKE MANIFOLD,2.4 THROTTLE BODY, TRIFECTA TUNED.


Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Glowbalt is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome