Check Engine Light - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Engine Mods Talk about Chevy Cobalt Engine Modifications here.

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 48 (permalink) Old 05-22-2013, 01:53 PM Thread Starter
Contributor
 
Join Date: Dec 2012
Posts: 428
Garage
Check Engine Light

ok so today i down shifted to third because i was goin around a pretty sharp turn i wasnt goin the fast so i didnt rev match but when i did down shift my car stalled out, i started it and drove it home just fine then when i got out the car i noticed the fans where still running with the car off but would eventualy turn off second is when i went back outside to move the car i noticed my check engine light was on and my boost gauge is all wacked, the code the the CEL is P0098 IAT voltage high or somthing like that.... how do i fix this
derekhollister is offline  
Sponsored Links
Advertisement
 
post #2 of 48 (permalink) Old 05-22-2013, 01:56 PM
Levee
YourCobalt of the Month Winner
YourCobalt.com Premium Member
Admin


 
Leveecius's Avatar
 
Join Date: Aug 2009
Location: Battle Creek, MI
Posts: 3,210
Garage
Send a message via Yahoo to Leveecius
your cooling fans will stay on regardless if the key is in the car or if it is running. They are automatic. Your boost gauge is electric, not mechanical. Disconnect your battery for 10 minutes and plug it back in to reset it, and go from there.

'09 SS/TC - Stolen
Mods - Injen CAI, CIA MAF Relocate CP's, Dejon FMIC,
Custom 3" DP, 3" Exhaust, GT3076R, Pioneer AVH-4100DVD, Hurst STS, ZZP triple pod, Autometer Cobalt boost/DPIC/WB gauges, Nitto NT05 245/40/18's, H&R Springs, 80:20 Meth Spray
Future - KSport Kontrol Pro Coilovers, 10% Tint, FMIC spray
538whp/501wtq @38 psi on meth and 93 oct on stock ish motor


06 EVO IX MR/SE - Sold
Mods - *Updated 10/6/13* AEM TRUboost EBC, 4in custom TBE, SD dual 93/e85 tune, ETS 4in Race Core FMIC, Dual Aeromotive 400lph Fuel Pumps, T4 Tubular Manifold w/ dual WG's, FP Super99HTZ DBB Turbo, GSC 274 mivec cams, ARP headstuds/rod studs, FIC 2150cc Injectors, Aeromotive FPR, Aeromotive Fuel Rail, catch can, Mini Battery Kit, Slim Coolant Fan, Kiggly Racing high pressure valve Springs/Titanium Retainers, Supertech Stainless Steel Valves, Dual VTA Tial 44mm WG's, 4g64 Stroker Manley Pistons, 155mm 2.4 LR Manley Turbo Plus I Beam Rods with ARP 625 Studs, 100mm forged non-billet Manley Crankshaft, Full H/E PNP with Port Matching, Kiggly Racing Girdle, Dual Tial 50mm BOV's, Excedy Triple Disc Carbon HD Clutch, AEM EMS

'95 Ram 2500 Diesel
Mods - 5in TBE, Boost Elbow set to 28psi, Adjusted fuel pump, Open Turbo.

Future Mods- Super Street Clutch (rated @1400ftlbs tq), 67mm turbo, 160lb valve springs, added timing, tubular exhaust manifold, larger injectors, possible 6 spd swap.


Master ASE Certified Gasoline/Diesel Technician since 2004

Speed Junkies Social Group

Yourcobalt Official Facebook Page!

Syndicate of Tuners Official Page! Up and going again as of 1/11/13

Click here to PM me if you have questions or issues!
Leveecius is offline  
post #3 of 48 (permalink) Old 05-22-2013, 02:02 PM Thread Starter
Contributor
 
Join Date: Dec 2012
Posts: 428
Garage
well the fans stay running with the car off and key is out that norm?
derekhollister is offline  
 
post #4 of 48 (permalink) Old 05-22-2013, 02:03 PM
Levee
YourCobalt of the Month Winner
YourCobalt.com Premium Member
Admin


 
Leveecius's Avatar
 
Join Date: Aug 2009
Location: Battle Creek, MI
Posts: 3,210
Garage
Send a message via Yahoo to Leveecius
There are cars that are known to do that. That's why there is a warning label for them that says they can turn on at any time, and I have seen cars that do that.

'09 SS/TC - Stolen
Mods - Injen CAI, CIA MAF Relocate CP's, Dejon FMIC,
Custom 3" DP, 3" Exhaust, GT3076R, Pioneer AVH-4100DVD, Hurst STS, ZZP triple pod, Autometer Cobalt boost/DPIC/WB gauges, Nitto NT05 245/40/18's, H&R Springs, 80:20 Meth Spray
Future - KSport Kontrol Pro Coilovers, 10% Tint, FMIC spray
538whp/501wtq @38 psi on meth and 93 oct on stock ish motor


06 EVO IX MR/SE - Sold
Mods - *Updated 10/6/13* AEM TRUboost EBC, 4in custom TBE, SD dual 93/e85 tune, ETS 4in Race Core FMIC, Dual Aeromotive 400lph Fuel Pumps, T4 Tubular Manifold w/ dual WG's, FP Super99HTZ DBB Turbo, GSC 274 mivec cams, ARP headstuds/rod studs, FIC 2150cc Injectors, Aeromotive FPR, Aeromotive Fuel Rail, catch can, Mini Battery Kit, Slim Coolant Fan, Kiggly Racing high pressure valve Springs/Titanium Retainers, Supertech Stainless Steel Valves, Dual VTA Tial 44mm WG's, 4g64 Stroker Manley Pistons, 155mm 2.4 LR Manley Turbo Plus I Beam Rods with ARP 625 Studs, 100mm forged non-billet Manley Crankshaft, Full H/E PNP with Port Matching, Kiggly Racing Girdle, Dual Tial 50mm BOV's, Excedy Triple Disc Carbon HD Clutch, AEM EMS

'95 Ram 2500 Diesel
Mods - 5in TBE, Boost Elbow set to 28psi, Adjusted fuel pump, Open Turbo.

Future Mods- Super Street Clutch (rated @1400ftlbs tq), 67mm turbo, 160lb valve springs, added timing, tubular exhaust manifold, larger injectors, possible 6 spd swap.


Master ASE Certified Gasoline/Diesel Technician since 2004

Speed Junkies Social Group

Yourcobalt Official Facebook Page!

Syndicate of Tuners Official Page! Up and going again as of 1/11/13

Click here to PM me if you have questions or issues!
Leveecius is offline  
post #5 of 48 (permalink) Old 05-22-2013, 02:10 PM Thread Starter
Contributor
 
Join Date: Dec 2012
Posts: 428
Garage
that is true i forgot about those. thought it was because the CEL because thats the only time its done that and also the first time ive seen a cars fine working with the car off and keys removed
derekhollister is offline  
post #6 of 48 (permalink) Old 05-22-2013, 02:21 PM
Levee
YourCobalt of the Month Winner
YourCobalt.com Premium Member
Admin


 
Leveecius's Avatar
 
Join Date: Aug 2009
Location: Battle Creek, MI
Posts: 3,210
Garage
Send a message via Yahoo to Leveecius
Right, well if the CEL is throwing an AIT voltage too high, that would mean the AIT is going to be reading higher than what it really is, thus making it seem the car is hotter than it is and would turn on the fans.

'09 SS/TC - Stolen
Mods - Injen CAI, CIA MAF Relocate CP's, Dejon FMIC,
Custom 3" DP, 3" Exhaust, GT3076R, Pioneer AVH-4100DVD, Hurst STS, ZZP triple pod, Autometer Cobalt boost/DPIC/WB gauges, Nitto NT05 245/40/18's, H&R Springs, 80:20 Meth Spray
Future - KSport Kontrol Pro Coilovers, 10% Tint, FMIC spray
538whp/501wtq @38 psi on meth and 93 oct on stock ish motor


06 EVO IX MR/SE - Sold
Mods - *Updated 10/6/13* AEM TRUboost EBC, 4in custom TBE, SD dual 93/e85 tune, ETS 4in Race Core FMIC, Dual Aeromotive 400lph Fuel Pumps, T4 Tubular Manifold w/ dual WG's, FP Super99HTZ DBB Turbo, GSC 274 mivec cams, ARP headstuds/rod studs, FIC 2150cc Injectors, Aeromotive FPR, Aeromotive Fuel Rail, catch can, Mini Battery Kit, Slim Coolant Fan, Kiggly Racing high pressure valve Springs/Titanium Retainers, Supertech Stainless Steel Valves, Dual VTA Tial 44mm WG's, 4g64 Stroker Manley Pistons, 155mm 2.4 LR Manley Turbo Plus I Beam Rods with ARP 625 Studs, 100mm forged non-billet Manley Crankshaft, Full H/E PNP with Port Matching, Kiggly Racing Girdle, Dual Tial 50mm BOV's, Excedy Triple Disc Carbon HD Clutch, AEM EMS

'95 Ram 2500 Diesel
Mods - 5in TBE, Boost Elbow set to 28psi, Adjusted fuel pump, Open Turbo.

Future Mods- Super Street Clutch (rated @1400ftlbs tq), 67mm turbo, 160lb valve springs, added timing, tubular exhaust manifold, larger injectors, possible 6 spd swap.


Master ASE Certified Gasoline/Diesel Technician since 2004

Speed Junkies Social Group

Yourcobalt Official Facebook Page!

Syndicate of Tuners Official Page! Up and going again as of 1/11/13

Click here to PM me if you have questions or issues!
Leveecius is offline  
post #7 of 48 (permalink) Old 05-22-2013, 02:51 PM
YourCobalt of the Quarter Winner
YourCobalt of the Month Winner


 
BankerBalt's Avatar
 
Join Date: Oct 2010
Location: Eagan MN
Posts: 4,647
Garage
Fan isn't controlled by iat's though...?

Forged L61 BW S252 Turbocharged Showoff Thread
BankerBalt is offline  
post #8 of 48 (permalink) Old 05-22-2013, 02:54 PM
Levee
YourCobalt of the Month Winner
YourCobalt.com Premium Member
Admin


 
Leveecius's Avatar
 
Join Date: Aug 2009
Location: Battle Creek, MI
Posts: 3,210
Garage
Send a message via Yahoo to Leveecius
LOL, you're right. I am thinking CTS, my bad. I'd still reset and see where it goes from there.

'09 SS/TC - Stolen
Mods - Injen CAI, CIA MAF Relocate CP's, Dejon FMIC,
Custom 3" DP, 3" Exhaust, GT3076R, Pioneer AVH-4100DVD, Hurst STS, ZZP triple pod, Autometer Cobalt boost/DPIC/WB gauges, Nitto NT05 245/40/18's, H&R Springs, 80:20 Meth Spray
Future - KSport Kontrol Pro Coilovers, 10% Tint, FMIC spray
538whp/501wtq @38 psi on meth and 93 oct on stock ish motor


06 EVO IX MR/SE - Sold
Mods - *Updated 10/6/13* AEM TRUboost EBC, 4in custom TBE, SD dual 93/e85 tune, ETS 4in Race Core FMIC, Dual Aeromotive 400lph Fuel Pumps, T4 Tubular Manifold w/ dual WG's, FP Super99HTZ DBB Turbo, GSC 274 mivec cams, ARP headstuds/rod studs, FIC 2150cc Injectors, Aeromotive FPR, Aeromotive Fuel Rail, catch can, Mini Battery Kit, Slim Coolant Fan, Kiggly Racing high pressure valve Springs/Titanium Retainers, Supertech Stainless Steel Valves, Dual VTA Tial 44mm WG's, 4g64 Stroker Manley Pistons, 155mm 2.4 LR Manley Turbo Plus I Beam Rods with ARP 625 Studs, 100mm forged non-billet Manley Crankshaft, Full H/E PNP with Port Matching, Kiggly Racing Girdle, Dual Tial 50mm BOV's, Excedy Triple Disc Carbon HD Clutch, AEM EMS

'95 Ram 2500 Diesel
Mods - 5in TBE, Boost Elbow set to 28psi, Adjusted fuel pump, Open Turbo.

Future Mods- Super Street Clutch (rated @1400ftlbs tq), 67mm turbo, 160lb valve springs, added timing, tubular exhaust manifold, larger injectors, possible 6 spd swap.


Master ASE Certified Gasoline/Diesel Technician since 2004

Speed Junkies Social Group

Yourcobalt Official Facebook Page!

Syndicate of Tuners Official Page! Up and going again as of 1/11/13

Click here to PM me if you have questions or issues!
Leveecius is offline  
post #9 of 48 (permalink) Old 05-22-2013, 03:43 PM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage
Cooling Fan Control 2.2L (L61)
The engine cooling fan system consists of one cooling fan and two relays. The cooling fan has 2 windings in the motor, one winding is for low speed and the other winding is for high speed. Voltage is supplied to the relays from the 30 A cooling fan 1 and 30 A cooling fan 2 fuses. The engine control module (PCM) controls the low speed fan operation by grounding the cool fan 1 relay control circuit. When the cooling fan 1 relay is energized, voltage is delivered to the cooling fan low speed winding. The PCM controls the high speed fan operation by grounding the cool fan 2 relay control circuit. When the cooling fan 2 relay is energized, voltage is delivered to the cooling fan high speed winding. The cooling fan motor is grounded through its own ground circuit.

The PCM commands Low Speed Fans ON under the following conditions:

• Engine coolant temperature (ECT) exceeds approximately 106C (223F).

• A/C refrigerant pressure exceeds 1 310 kPa (190 psi).

• After the vehicle is shut off, the ECT at key-off is greater than 140C (284F) and system voltage is more than 12 volts. The fans will stay on for approximately 3 minutes.

The PCM commands High Speed Fans ON under the following conditions:

• ECT reaches 110C (230F).

• A/C refrigerant pressure exceeds 1 655 kPa (240 psi).

• When certain DTCs set

Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
post #10 of 48 (permalink) Old 05-22-2013, 05:50 PM Thread Starter
Contributor
 
Join Date: Dec 2012
Posts: 428
Garage
ok i got it reset and the CEL went out but the boost goes is still all over the place or just sits at 0
derekhollister is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome