Need Performance?? - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Engine Mods Talk about Chevy Cobalt Engine Modifications here.

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 31 (permalink) Old 06-24-2013, 01:42 PM Thread Starter
Cobalt Specialist
 
B-Low187's Avatar
 
Join Date: Jan 2006
Location: FL
Posts: 1,119
Need Performance??

Anyone looking for a place to do their short, long block, or head build?
B-Low187 is offline  
Sponsored Links
Advertisement
 
post #2 of 31 (permalink) Old 06-25-2013, 05:07 PM Thread Starter
Cobalt Specialist
 
B-Low187's Avatar
 
Join Date: Jan 2006
Location: FL
Posts: 1,119
Dang, I know I've been away for a while since I totaled my Balt, but does nobody wish to make serious horsepower with their Balt anymore?
B-Low187 is offline  
post #3 of 31 (permalink) Old 06-25-2013, 06:16 PM
YourCobalt of the Quarter Winner
YourCobalt of the Month Winner


 
BankerBalt's Avatar
 
Join Date: Oct 2010
Location: Eagan MN
Posts: 4,647
Garage
i already have a built bottom and top end with an s252 with my 2.2 pushing ~400CHP. all my work was done by myself though.

Forged L61 BW S252 Turbocharged Showoff Thread
BankerBalt is offline  
 
post #4 of 31 (permalink) Old 06-25-2013, 08:24 PM
Super Moderator


 
Plain Jane's Avatar
 
Join Date: Mar 2013
Location: Montreal, Quebec
Posts: 3,860
Garage
Quote:
Originally Posted by BankerBalt View Post
i already have a built bottom and top end with an s252 with my 2.2 pushing ~400CHP. all my work was done by myself though.
I have a sticker that says 'Injen', How much HP is that worth?

'07 Eclipse GT build thread - 280whp, 254wtq
Plain Jane is offline  
post #5 of 31 (permalink) Old 06-25-2013, 08:32 PM
YourCobalt of the Quarter Winner
YourCobalt of the Month Winner


 
BankerBalt's Avatar
 
Join Date: Oct 2010
Location: Eagan MN
Posts: 4,647
Garage
stickers = 2.5x the amount of the horsepower that they claim their parts add. therefore in this case it would be about 18hp

Forged L61 BW S252 Turbocharged Showoff Thread
BankerBalt is offline  
post #6 of 31 (permalink) Old 06-25-2013, 08:45 PM
Super Moderator


 
Plain Jane's Avatar
 
Join Date: Mar 2013
Location: Montreal, Quebec
Posts: 3,860
Garage
Woo, not bad. And to think I was going to put it on the lawnmower.

'07 Eclipse GT build thread - 280whp, 254wtq
Plain Jane is offline  
post #7 of 31 (permalink) Old 06-25-2013, 09:33 PM Thread Starter
Cobalt Specialist
 
B-Low187's Avatar
 
Join Date: Jan 2006
Location: FL
Posts: 1,119
Quote:
Originally Posted by BankerBalt View Post
i already have a built bottom and top end with an s252 with my 2.2 pushing ~400CHP. all my work was done by myself though.
Nice, that's what I like to see.
B-Low187 is offline  
post #8 of 31 (permalink) Old 06-26-2013, 05:53 AM
Levee
YourCobalt of the Month Winner
YourCobalt.com Premium Member
Admin


 
Leveecius's Avatar
 
Join Date: Aug 2009
Location: Battle Creek, MI
Posts: 3,210
Garage
Send a message via Yahoo to Leveecius
I've got a nice little project I will be doing once I get another SS. Hoping to break Ryan's HP record with the LNF (if that says anything)

'09 SS/TC - Stolen
Mods - Injen CAI, CIA MAF Relocate CP's, Dejon FMIC,
Custom 3" DP, 3" Exhaust, GT3076R, Pioneer AVH-4100DVD, Hurst STS, ZZP triple pod, Autometer Cobalt boost/DPIC/WB gauges, Nitto NT05 245/40/18's, H&R Springs, 80:20 Meth Spray
Future - KSport Kontrol Pro Coilovers, 10% Tint, FMIC spray
538whp/501wtq @38 psi on meth and 93 oct on stock ish motor


06 EVO IX MR/SE - Sold
Mods - *Updated 10/6/13* AEM TRUboost EBC, 4in custom TBE, SD dual 93/e85 tune, ETS 4in Race Core FMIC, Dual Aeromotive 400lph Fuel Pumps, T4 Tubular Manifold w/ dual WG's, FP Super99HTZ DBB Turbo, GSC 274 mivec cams, ARP headstuds/rod studs, FIC 2150cc Injectors, Aeromotive FPR, Aeromotive Fuel Rail, catch can, Mini Battery Kit, Slim Coolant Fan, Kiggly Racing high pressure valve Springs/Titanium Retainers, Supertech Stainless Steel Valves, Dual VTA Tial 44mm WG's, 4g64 Stroker Manley Pistons, 155mm 2.4 LR Manley Turbo Plus I Beam Rods with ARP 625 Studs, 100mm forged non-billet Manley Crankshaft, Full H/E PNP with Port Matching, Kiggly Racing Girdle, Dual Tial 50mm BOV's, Excedy Triple Disc Carbon HD Clutch, AEM EMS

'95 Ram 2500 Diesel
Mods - 5in TBE, Boost Elbow set to 28psi, Adjusted fuel pump, Open Turbo.

Future Mods- Super Street Clutch (rated @1400ftlbs tq), 67mm turbo, 160lb valve springs, added timing, tubular exhaust manifold, larger injectors, possible 6 spd swap.


Master ASE Certified Gasoline/Diesel Technician since 2004

Speed Junkies Social Group

Yourcobalt Official Facebook Page!

Syndicate of Tuners Official Page! Up and going again as of 1/11/13

Click here to PM me if you have questions or issues!
Leveecius is offline  
post #9 of 31 (permalink) Old 06-26-2013, 05:55 AM
Cobalt Specialist
 
JacksonWilder3's Avatar
 
Join Date: May 2012
Location: Wasilla, Alaska
Posts: 1,067
Quote:
Originally Posted by Leveecius View Post
I've got a nice little project I will be doing once I get another SS. Hoping to break Ryan's HP record with the LNF (if that says anything)
The only record you could break is most donuts eaten in a minute


2010 Cobalt 2LT Sports Package
2.5% tint all the way round.
SUPRRAAACHARRRGGEDDD
2.9 pulley, 60# Injectors, Injen 2.5" intake
55 Watt 6000K Hi/Lo HID's
35 Watt 5000K Fogs
Black SS 17" Wheels
Debadged
Spyder 3" Carbon Fiber Antenna
YAKIMA ROOF RACK WITH 40" LIGHTBAR
2.5' ZZP DP
Full set of Black Recaros
Eibach sportlines for teh low.
Front and rear SS lips
JacksonWilder3 is offline  
post #10 of 31 (permalink) Old 06-26-2013, 06:25 AM
Levee
YourCobalt of the Month Winner
YourCobalt.com Premium Member
Admin


 
Leveecius's Avatar
 
Join Date: Aug 2009
Location: Battle Creek, MI
Posts: 3,210
Garage
Send a message via Yahoo to Leveecius
^^Did that already, as well as number of pancakes eaten at our local IHOP lol

'09 SS/TC - Stolen
Mods - Injen CAI, CIA MAF Relocate CP's, Dejon FMIC,
Custom 3" DP, 3" Exhaust, GT3076R, Pioneer AVH-4100DVD, Hurst STS, ZZP triple pod, Autometer Cobalt boost/DPIC/WB gauges, Nitto NT05 245/40/18's, H&R Springs, 80:20 Meth Spray
Future - KSport Kontrol Pro Coilovers, 10% Tint, FMIC spray
538whp/501wtq @38 psi on meth and 93 oct on stock ish motor


06 EVO IX MR/SE - Sold
Mods - *Updated 10/6/13* AEM TRUboost EBC, 4in custom TBE, SD dual 93/e85 tune, ETS 4in Race Core FMIC, Dual Aeromotive 400lph Fuel Pumps, T4 Tubular Manifold w/ dual WG's, FP Super99HTZ DBB Turbo, GSC 274 mivec cams, ARP headstuds/rod studs, FIC 2150cc Injectors, Aeromotive FPR, Aeromotive Fuel Rail, catch can, Mini Battery Kit, Slim Coolant Fan, Kiggly Racing high pressure valve Springs/Titanium Retainers, Supertech Stainless Steel Valves, Dual VTA Tial 44mm WG's, 4g64 Stroker Manley Pistons, 155mm 2.4 LR Manley Turbo Plus I Beam Rods with ARP 625 Studs, 100mm forged non-billet Manley Crankshaft, Full H/E PNP with Port Matching, Kiggly Racing Girdle, Dual Tial 50mm BOV's, Excedy Triple Disc Carbon HD Clutch, AEM EMS

'95 Ram 2500 Diesel
Mods - 5in TBE, Boost Elbow set to 28psi, Adjusted fuel pump, Open Turbo.

Future Mods- Super Street Clutch (rated @1400ftlbs tq), 67mm turbo, 160lb valve springs, added timing, tubular exhaust manifold, larger injectors, possible 6 spd swap.


Master ASE Certified Gasoline/Diesel Technician since 2004

Speed Junkies Social Group

Yourcobalt Official Facebook Page!

Syndicate of Tuners Official Page! Up and going again as of 1/11/13

Click here to PM me if you have questions or issues!
Leveecius is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome