My Parts Arived Today - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Engine Mods Talk about Chevy Cobalt Engine Modifications here.

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 07-03-2008, 01:29 PM Thread Starter
Newcomer
 
ZOLOMAN's Avatar
 
Join Date: Feb 2008
Location: Rexburg Idaho
Posts: 39
My Parts Arived Today

well my parts got here today but since its the 3rd of July at 2:27 i cant get them installed till next week :(

TEAM BOOST
Cobalt SS/SC Rally Yellow
Appearance mods: 20% tint, Painted headlight housing, tinted tails
Performance mods: Fujita CAI, 2.5" Down pipe with high flow cat, Tenzo R X-Spec muffler, 60Ib injectors, 2.7 pulley, Methanol injeaction, one step colder plugs, and Powerlabs Custom tune
ZOLOMAN is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 07-03-2008, 02:11 PM
Veteran
 
burzumaske20's Avatar
 
Join Date: Dec 2007
Posts: 594
why can't you get them installed now?

2006 Chevy Cobalt LT
Synthetic oil
K&N air intake system
Custom 2.5" dynomax exhaust system
B&M shiftplus
B&M tranny cooler
Catless Downpipe
stainless steel pacesetter header
5900k light bulbs
2.4 intake manifold
burzumaske20 is offline  
post #3 of 9 (permalink) Old 07-03-2008, 03:51 PM Thread Starter
Newcomer
 
ZOLOMAN's Avatar
 
Join Date: Feb 2008
Location: Rexburg Idaho
Posts: 39
because the guy that is doing the install is gone till next week and the place i am getting my tune from closed early

TEAM BOOST
Cobalt SS/SC Rally Yellow
Appearance mods: 20% tint, Painted headlight housing, tinted tails
Performance mods: Fujita CAI, 2.5" Down pipe with high flow cat, Tenzo R X-Spec muffler, 60Ib injectors, 2.7 pulley, Methanol injeaction, one step colder plugs, and Powerlabs Custom tune
ZOLOMAN is offline  
 
post #4 of 9 (permalink) Old 07-03-2008, 04:32 PM
Veteran
 
burzumaske20's Avatar
 
Join Date: Dec 2007
Posts: 594
well that stinks

2006 Chevy Cobalt LT
Synthetic oil
K&N air intake system
Custom 2.5" dynomax exhaust system
B&M shiftplus
B&M tranny cooler
Catless Downpipe
stainless steel pacesetter header
5900k light bulbs
2.4 intake manifold
burzumaske20 is offline  
post #5 of 9 (permalink) Old 07-03-2008, 04:34 PM
Cobalt Specialist
 
Join Date: Oct 2006
Location: New York
Posts: 1,388
Send a message via AIM to Chester
very nice. Let us know how you made out in the end and the benefits you have felt



Mod's So Far: AEM CAI, C.A. Header, 2.50 Magnaflow Catback Exhaust , ZZP Catless Downpipe, DC Carbon Strut Bar, Dropped on Progress Springs. Tinted, Fully Debadged, Custom front SS bumper,2 Audiobahn 10" w/JL amp, Lower Billett Grille, Sengen 18 x 8 rims wrapped in Capitol Sport UHP 225/40/18.

Chester is offline  
post #6 of 9 (permalink) Old 07-10-2008, 03:27 PM Thread Starter
Newcomer
 
ZOLOMAN's Avatar
 
Join Date: Feb 2008
Location: Rexburg Idaho
Posts: 39
well i got it installed my numbers are 15PSI 202WHP and 205WTQ, at first i was like WTF but i am close to 5500Ft above Sea level, the guy that tuned my car said that if i dyno it at sea level i would have way different numbers lol there is no air up here oh and the numbers gm gives out is flywheel HP and TQ mine is wheel HP AND TQ and yes there is a big difference in the way it accelerates its a hell of alot faster 60Ib injectors 2.9 pulley and custom tune FTW

TEAM BOOST
Cobalt SS/SC Rally Yellow
Appearance mods: 20% tint, Painted headlight housing, tinted tails
Performance mods: Fujita CAI, 2.5" Down pipe with high flow cat, Tenzo R X-Spec muffler, 60Ib injectors, 2.7 pulley, Methanol injeaction, one step colder plugs, and Powerlabs Custom tune
ZOLOMAN is offline  
post #7 of 9 (permalink) Old 07-11-2008, 09:05 AM
Cobalt Specialist
 
Join Date: Oct 2006
Location: New York
Posts: 1,388
Send a message via AIM to Chester
So get that ***** on the dyno and post pics of the sheets : )



Mod's So Far: AEM CAI, C.A. Header, 2.50 Magnaflow Catback Exhaust , ZZP Catless Downpipe, DC Carbon Strut Bar, Dropped on Progress Springs. Tinted, Fully Debadged, Custom front SS bumper,2 Audiobahn 10" w/JL amp, Lower Billett Grille, Sengen 18 x 8 rims wrapped in Capitol Sport UHP 225/40/18.

Chester is offline  
post #8 of 9 (permalink) Old 07-11-2008, 01:13 PM Thread Starter
Newcomer
 
ZOLOMAN's Avatar
 
Join Date: Feb 2008
Location: Rexburg Idaho
Posts: 39
i did i got a dyno tune i will get the pics of the dyno before tuning and after tuning sheets later tonight

TEAM BOOST
Cobalt SS/SC Rally Yellow
Appearance mods: 20% tint, Painted headlight housing, tinted tails
Performance mods: Fujita CAI, 2.5" Down pipe with high flow cat, Tenzo R X-Spec muffler, 60Ib injectors, 2.7 pulley, Methanol injeaction, one step colder plugs, and Powerlabs Custom tune
ZOLOMAN is offline  
post #9 of 9 (permalink) Old 07-11-2008, 05:39 PM
Cobalt Specialist
 
Join Date: Oct 2006
Location: New York
Posts: 1,388
Send a message via AIM to Chester
Veryy Nice . and please post a pic of your muffler... i have never heard of that brand.... just curious



Mod's So Far: AEM CAI, C.A. Header, 2.50 Magnaflow Catback Exhaust , ZZP Catless Downpipe, DC Carbon Strut Bar, Dropped on Progress Springs. Tinted, Fully Debadged, Custom front SS bumper,2 Audiobahn 10" w/JL amp, Lower Billett Grille, Sengen 18 x 8 rims wrapped in Capitol Sport UHP 225/40/18.

Chester is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome