What Does Everyone Think of This Idea?(Concept Project) - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Interior & Exterior Styling Talk about Chevy Cobalt interior and exterior products such as body kits, spoilers, steering wheels, shift knobs, etc.

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 21 (permalink) Old 09-29-2010, 06:54 PM Thread Starter
Newcomer
 
Firestorm5's Avatar
 
Join Date: Jul 2010
Location: Alabama
Posts: 7
What Does Everyone Think of This Idea?(Concept Project)

Ok so I was thinking about some stuff to do to my car and a thought occurs. What if I were to remove the rear seats, then get some painted fiberglass to fill the open area between the cabin and trunk. Then, with all that done, replace the rear seat with 2 bucket seats and replace the middle console with one adjoining the front and back. (Ill attach a crude drawing later) I never use my back seat and I think that a split rear seat assembly like the ones up front would look pretty nice. Need some feedback on this one cause it would sink a lot of money.


P.S. What would look better on a victory red g5? Carbon fiber interior trim or red?
Firestorm5 is offline  
Sponsored Links
Advertisement
 
post #2 of 21 (permalink) Old 09-29-2010, 07:02 PM
Get Out The Sawzall
Staff AlumniCobalt Master
 
DROPPEDATBIRTH's Avatar
 
Join Date: Apr 2010
Location: Sewickley, Pa
Posts: 1,856
Garage
Do you have any idea of the time requirements that this project intales. Of course it would look good if done correctly.
DROPPEDATBIRTH is offline  
post #3 of 21 (permalink) Old 09-29-2010, 07:22 PM
YourCobalt of the Month WinnerExpert
 
Join Date: Sep 2010
Location: Pa
Posts: 931
Send a message via AIM to Burnt2Death
I think it would look pretty kool when you got done. Great way to think outside of the box. lol

Burnt2Death is offline  
 
post #4 of 21 (permalink) Old 09-29-2010, 08:04 PM
Say What again!
YourCobalt of the Month Winner
YourCobalt.com Premium Member


 
MP81's Avatar
 
Join Date: Sep 2009
Location: Washington Township, Michigan
Posts: 5,982
Garage
So you want to make it a true 2+2 then?

1986 Chevrolet Camaro IROC-Z - Wrecked/Sold
1998 Chevrolet Cavalier - Wrecked/Donated
2007 Chevrolet Cobalt LT - M62 Supercharger, Ported Throttle Body, 42 lb/hr Injectors, Intense 2.9" Pulley, Cobra Heat Exchanger, SS/TC Exhaust, TTR Engine and Trans Mounts, Trifecta Tune, ZZP Header and Downpipe, '08+ FE5 Struts/Shocks, SSC Springs, FE5 Control Arms, SS/SC Front Swaybar, Powell Hardcore Rear Swaybar, 18" MSR 045s, Dunlop ZIIs, Nightshaded Tails/Side Markers, Shorty Antenna, Black Bowties, Black Grilles, Black Headlights, Dual JL 12" w1v2 Subs, A/D/S Front/Rear Speakers, Pioneer 7" Touchscreen, G85 Recaros, Leather Rear Seats, 160 MPH Cluster.
2014 Chevrolet Cruze Diesel - 17" MSR 013s, Black Bowties, UR Rear Lower Bar
1981 Chevrolet Camaro Z28 - JVC Ribbon Tweeters, SEAS Mids, Pyle Woofers, Kenwood Tape Deck, Zapco Amp/Equilizer, Ceramic-Coated Longtubes, 2.5" Pypes Stainless Exhaust, Bilstein B6 Shocks, GW U/L Control Arms, Hotchkis Springs Sway Bars, DD HDX Cluster
2017 Chevrolet Volt LT - Black Bowties
MP81 is offline  
post #5 of 21 (permalink) Old 09-29-2010, 08:07 PM
Forum Regular
 
Join Date: Sep 2010
Posts: 143
Garage
Sounds Awesome, Its not like anyone is going to fit in to that little middle seat comfortable anyways
Shadow591 is offline  
post #6 of 21 (permalink) Old 09-29-2010, 08:16 PM
Veteran
 
BlackLS Street's Avatar
 
Join Date: Dec 2009
Location: Elberton, Georgia
Posts: 680
Garage
Send a message via Yahoo to BlackLS Street Send a message via Skype™ to BlackLS Street
It's a great idea and I like the concept.
It will take a lot of time and probably a good amount of money but in the end you will have an interior that no one else has
Props for a new and unique idea!
BlackLS Street is offline  
post #7 of 21 (permalink) Old 09-29-2010, 08:35 PM
Forum God
 
hailcesar75's Avatar
 
Join Date: Nov 2008
Location: broooooklyn, NY
Posts: 2,969
Dude just go for it. If you can see it then it'll work. That's how all my mods are done

Dropped Carbon Fiber SS, Project JDM

hailcesar75 is offline  
post #8 of 21 (permalink) Old 09-30-2010, 01:03 AM
Cornier Than Ethanol
YourCobalt.com Premium Member


 
YellowSS06's Avatar
 
Join Date: Mar 2010
Location: Decatur, IL
Posts: 866
Garage
I've actually had an idea similar to this, along with making the trim pieces on the dash all one fiberglassed piece instead of 3 and building the rear deck in with the rest of the back seat part. But yeah, it would take forever! lol Of course, I know a dude whose entire interior is fiberglass, including the floorpan. Molded screens in the passenger floor, etc... That had to be a bish and a half to do!



Last edited by YellowSS06; 09-30-2010 at 01:06 AM.
YellowSS06 is offline  
post #9 of 21 (permalink) Old 09-30-2010, 01:29 AM
Newcomer
 
Join Date: Apr 2010
Location: blairsville
Posts: 39
yeah i have been thinking about doing that for awhile only i am going to take it out and do a one seat conversion it will be really nice and it wont cost me anything cause i am going to school at wyotech i will upload pics when i am done and when i get the time to do it

TONY SHAFFER
chevyfreak1 is offline  
post #10 of 21 (permalink) Old 09-30-2010, 02:40 AM
Cornier Than Ethanol
YourCobalt.com Premium Member


 
YellowSS06's Avatar
 
Join Date: Mar 2010
Location: Decatur, IL
Posts: 866
Garage
Sweet, man. Can't wait to see it!


YellowSS06 is offline  
Sponsored Links
Advertisement
 
Closed Thread

Tags
concept , diy , rear

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome