PLUR13's new dash pics - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Interior & Exterior Styling Talk about Chevy Cobalt interior and exterior products such as body kits, spoilers, steering wheels, shift knobs, etc.

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 03-03-2008, 12:13 PM Thread Starter
Contributor
 
PLUR13's Avatar
 
Join Date: May 2007
Posts: 485
PLUR13's new dash pics

Well, seeing as how today was such a nice day here in South Carolina, I decided to go ahead and tear out my dash to be painted. It wasn't nearly as hard as I had thought it would be. Took me about 45 minutes. Since there were no how-to's or DIY's on any of the sites I looked on, I decided to do one myself and will get it posted up later after work. But for now, here are some pics of the painted and installed dash. Let me know what you guys think.























www.myspace.com/07cobalt
www.myspace.com/x_pro
http://www.cardomain.com/id/TeamNVSprez



Sponsored by:
Scott's Body Shop
Chaser Aerodynamics/Aerokits.com
Mothers Polishes, Waxes, Cleaners
AIT Racing
PLUR13 is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 03-03-2008, 01:22 PM
OBZ
Staff AlumniDedicated


 
OBZ's Avatar
 
Join Date: May 2006
Location: S.L.C. UT.
Posts: 3,006
Looks really good man! Was it very difficult removing it?



"A wise man speaks because he has something to say,
A fool speaks because he has to say something"
OBZ's showoff thread!
OBZ is offline  
post #3 of 14 (permalink) Old 03-03-2008, 01:50 PM
Forum Regular
 
light'balt's Avatar
 
Join Date: Jan 2008
Location: Iowa
Posts: 139
Very nice

light'balt is offline  
 
post #4 of 14 (permalink) Old 03-03-2008, 02:25 PM
Cobalt Specialist
 
Join Date: Oct 2006
Location: New York
Posts: 1,388
Send a message via AIM to Chester
Very nice how much of a glare are you gona get off of that when the sun beats on it tho



Mod's So Far: AEM CAI, C.A. Header, 2.50 Magnaflow Catback Exhaust , ZZP Catless Downpipe, DC Carbon Strut Bar, Dropped on Progress Springs. Tinted, Fully Debadged, Custom front SS bumper,2 Audiobahn 10" w/JL amp, Lower Billett Grille, Sengen 18 x 8 rims wrapped in Capitol Sport UHP 225/40/18.

Chester is offline  
post #5 of 14 (permalink) Old 03-03-2008, 02:27 PM
Contributor
 
rb513's Avatar
 
Join Date: Mar 2007
Location: glendale, oh
Posts: 314
looks clean man...nice job
rb513 is offline  
post #6 of 14 (permalink) Old 03-03-2008, 05:32 PM Thread Starter
Contributor
 
PLUR13's Avatar
 
Join Date: May 2007
Posts: 485
It wasn't that hard to take out. Only took about 45 minutes or so. ANd as far as the glare, it's not as bad as I thought it would be. But I did cut a piece of black fabric to cover the dash with for normal driving. Just wanted to have it painted for the car shows


www.myspace.com/07cobalt
www.myspace.com/x_pro
http://www.cardomain.com/id/TeamNVSprez



Sponsored by:
Scott's Body Shop
Chaser Aerodynamics/Aerokits.com
Mothers Polishes, Waxes, Cleaners
AIT Racing
PLUR13 is offline  
post #7 of 14 (permalink) Old 03-04-2008, 03:47 PM
Forum Regular
 
workinprogress's Avatar
 
Join Date: Oct 2007
Location: Pataskala, OH
Posts: 97
did you ever get that DIY up .. i looked and cant find it. i got my whole dash out but cant figure out the part aroudn the airbag.. help?

O7 BLACK LS 5-SPD
- debadged (badged inside) - black bowties
- black painted interior - black halo projectors
- Polk DXi650s -
- 20%, 5% tint - air-box mod
workinprogress is offline  
post #8 of 14 (permalink) Old 03-04-2008, 04:20 PM Thread Starter
Contributor
 
PLUR13's Avatar
 
Join Date: May 2007
Posts: 485
I plan on getting the how to up tonite, but as for the airbag, you need to drop down your glove box, look in that opening and you will see a small pull down flap type thing. Pull this down and you will see two 10mm bolts. These are the bolts holding the airbag in. Be sure and disconnect your battery and pull the airbag fuse before doing anything around the airbag tho.


www.myspace.com/07cobalt
www.myspace.com/x_pro
http://www.cardomain.com/id/TeamNVSprez



Sponsored by:
Scott's Body Shop
Chaser Aerodynamics/Aerokits.com
Mothers Polishes, Waxes, Cleaners
AIT Racing
PLUR13 is offline  
post #9 of 14 (permalink) Old 03-04-2008, 08:50 PM
Forum Regular
 
workinprogress's Avatar
 
Join Date: Oct 2007
Location: Pataskala, OH
Posts: 97
alright thanks... btw. is your spoiler custom made at a body shop or did you buy it somewhere cause that is sick.

O7 BLACK LS 5-SPD
- debadged (badged inside) - black bowties
- black painted interior - black halo projectors
- Polk DXi650s -
- 20%, 5% tint - air-box mod
workinprogress is offline  
post #10 of 14 (permalink) Old 03-04-2008, 09:31 PM
Veteran
 
gibsonj4's Avatar
 
Join Date: Oct 2006
Location: Florida
Posts: 575
Send a message via AIM to gibsonj4
Do u get any glare from the paint on the gauge overlay

2V Mustang GT - Cammed/Sprayed - The "Mustake" - Sold
2010 Cobalt 2LT - SOLD!
Chrysler 300C Hemi K&N & Tune
2005 Cobalt SS Supercharged - E85 TVS 2.9 - SOLD!
2001 Corvette C5 6MT
gibsonj4 is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome