Joined
·
0 Posts
Good afternoon 1966tbird,
I am new here but it is obvious you and coby7 are the resident experts and I could really use some assistance. I have a 06 cobalt with a no crank and no communication issue. It all started when the abs module fried. I have disconnected it for now and pulled the fuse. I have followed a previous thread you had and just finished the pin test at the bcm. I checked voltage at the bcm, BCMx2 was the connector with the right color wires. Found the white and blk wire, pin 62 had 5v now 56 white had no voltage, key off, on, or start. All the other white wires showed battery voltage so I believe I have the right one so what would be my next step, neutral safety or ignition or ? Also you previous posting was for an 08 so colors may be wrong.
I am new here but it is obvious you and coby7 are the resident experts and I could really use some assistance. I have a 06 cobalt with a no crank and no communication issue. It all started when the abs module fried. I have disconnected it for now and pulled the fuse. I have followed a previous thread you had and just finished the pin test at the bcm. I checked voltage at the bcm, BCMx2 was the connector with the right color wires. Found the white and blk wire, pin 62 had 5v now 56 white had no voltage, key off, on, or start. All the other white wires showed battery voltage so I believe I have the right one so what would be my next step, neutral safety or ignition or ? Also you previous posting was for an 08 so colors may be wrong.