Bleeding Clutch - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Problems and Service Talk about any mechanical problems you are having

 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 08-29-2010, 07:01 PM Thread Starter
Prospect
 
Join Date: Feb 2010
Posts: 16
Bleeding Clutch

just finished replacing clutch plate and theres no clutch pedal pressure so I figured we need to bleed the clutch, anybody know any other reason for no pedal pressure? also where's the bleeder?
kingsfisherman is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 09-04-2010, 07:02 AM
Newcomer
 
Join Date: Sep 2010
Posts: 13
Haven't done this on the cobalt yet but there should be a bleeder screw that you need to back off to bleed the air out of the clutch slave cylinder. It is much easier with two people. First back off the screw a full turn or so and pump the clutch. When oil starts to bleed out, the screw needs to be tightened back down. Just repeat as needed until you have full pressure in the system again. It may be different with this car but mechanically, it should be very similar.
ethridge is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome