What is This Part on My Car ? ( Help) - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Problems and Service Talk about any mechanical problems you are having

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 43 (permalink) Old 10-06-2010, 06:36 AM Thread Starter
Contributor
 
kstorm61's Avatar
 
Join Date: Aug 2010
Location: Oshkosh Wi
Posts: 441
Send a message via Yahoo to kstorm61
What is This Part on My Car ? ( Help)

so i was walking away from my car today and as i got a decent distance i saw this hanging half way down on the bottom of my car. can someone tell me what this part is what it does and if i can slide it back in ( it looked like it was half assed in their and it was not in correctly.

can this hurt my car not being on or no ? good idea to try to put it back on the right way ?








zzp 2.9 pulley simmeons 60lb injectors stage 2 gm belt zzp wire harness Bkr7e 1 step plugs S3 Heat exchanger zzp dual pass end plate 3in down pipe mid length header sport tech Cai hi flow cat Wideban gauge zzp can tune.

more mods to come in the future

kstorm61 is offline  
Sponsored Links
Advertisement
 
post #2 of 43 (permalink) Old 10-06-2010, 06:52 AM
Cobalt Specialist
 
krazedkitty's Avatar
 
Join Date: Mar 2010
Location: Wisconsin
Posts: 1,437
Garage
I have no idea. Where exactly was it hanging down from underneath your car?
krazedkitty is offline  
post #3 of 43 (permalink) Old 10-06-2010, 07:03 AM
Cobalt Specialist
 
TwistedBalt's Avatar
 
Join Date: Jun 2009
Location: Ft Wlaton Beach Florida
Posts: 1,440
I had that thing as well. I threw mine away. Couldn't figure out where the hell it went haha


More Twisted then a Purple Nipple
Check out my Ride https://www.yourcobalt.com/forums/veh...in-afb-fl.html
TwistedBalt is offline  
 
post #4 of 43 (permalink) Old 10-06-2010, 07:03 AM Thread Starter
Contributor
 
kstorm61's Avatar
 
Join Date: Aug 2010
Location: Oshkosh Wi
Posts: 441
Send a message via Yahoo to kstorm61
so im guessing twisted it didnt affect much ? i figured it was thier to keep dirt from getting into where it was placed at..but i was like wtf this thing is almost touching the road on one side.. i know were it goes just dont know what its for or why it came out lol


ya it was under neath my car..i layed on the road and i was right behinde my front drivers side wheel. that rubber or foam thing u see in my picture slides into something metal under the car and just sits their..i dont know what for...but it was hanging down and didnt look to be in very good...i just sliped it right out..and im sure i could put it back in..

i just dont know what it is or what its used for

zzp 2.9 pulley simmeons 60lb injectors stage 2 gm belt zzp wire harness Bkr7e 1 step plugs S3 Heat exchanger zzp dual pass end plate 3in down pipe mid length header sport tech Cai hi flow cat Wideban gauge zzp can tune.

more mods to come in the future

kstorm61 is offline  
post #5 of 43 (permalink) Old 10-06-2010, 07:06 AM
Cobalt Specialist
 
TwistedBalt's Avatar
 
Join Date: Jun 2009
Location: Ft Wlaton Beach Florida
Posts: 1,440
Mine was laying under my car and i thought it went to something in the hood maybe as a seal or something to keep dirt/water out. I'm not sure but my car is running fine 100K and 4 years old w/o a problem


More Twisted then a Purple Nipple
Check out my Ride https://www.yourcobalt.com/forums/veh...in-afb-fl.html
TwistedBalt is offline  
post #6 of 43 (permalink) Old 10-06-2010, 07:08 AM Thread Starter
Contributor
 
kstorm61's Avatar
 
Join Date: Aug 2010
Location: Oshkosh Wi
Posts: 441
Send a message via Yahoo to kstorm61
that makes me feel better. see like urs i looked under the car and i saw it hanging down behinde my drivers side tire like in the middle of the car...and i was like wtf why is that like that...so i stuck my hand up it looked at it and it just came right out lol...im like is chevy playing jedi mind games with me right now ?

zzp 2.9 pulley simmeons 60lb injectors stage 2 gm belt zzp wire harness Bkr7e 1 step plugs S3 Heat exchanger zzp dual pass end plate 3in down pipe mid length header sport tech Cai hi flow cat Wideban gauge zzp can tune.

more mods to come in the future

kstorm61 is offline  
post #7 of 43 (permalink) Old 10-06-2010, 07:13 AM
Cobalt Specialist
 
krazedkitty's Avatar
 
Join Date: Mar 2010
Location: Wisconsin
Posts: 1,437
Garage
Whew, crisis averted! If mine came with one, it doesn't have it anymore either.
krazedkitty is offline  
post #8 of 43 (permalink) Old 10-06-2010, 07:15 AM Thread Starter
Contributor
 
kstorm61's Avatar
 
Join Date: Aug 2010
Location: Oshkosh Wi
Posts: 441
Send a message via Yahoo to kstorm61
lol i just dont get why i have it if it was just going to fall off lol...maybe that was one of those extras with the super dupper option package lol...who knows but i still feel weird it bugs me its not on..but whatever i soupose lol if it wotn hurt anything no biggie

zzp 2.9 pulley simmeons 60lb injectors stage 2 gm belt zzp wire harness Bkr7e 1 step plugs S3 Heat exchanger zzp dual pass end plate 3in down pipe mid length header sport tech Cai hi flow cat Wideban gauge zzp can tune.

more mods to come in the future

kstorm61 is offline  
post #9 of 43 (permalink) Old 10-06-2010, 07:18 AM
Cobalt Specialist
 
krazedkitty's Avatar
 
Join Date: Mar 2010
Location: Wisconsin
Posts: 1,437
Garage
lol, well I'm sure GM didn't intend it to fall off (or did they !). I would just leave it off, so it doesn't fly off while you're driving!
krazedkitty is offline  
post #10 of 43 (permalink) Old 10-06-2010, 07:26 AM Thread Starter
Contributor
 
kstorm61's Avatar
 
Join Date: Aug 2010
Location: Oshkosh Wi
Posts: 441
Send a message via Yahoo to kstorm61
lol ya that would be bad but if i ever go to the track if i lose i could rig it to fly off and blame my loss on that jump out my car pop the hood and act like i cant believe what just happend lol j/k ya im going to leave it off just incase...god forbid i decide to go over 30mph lol dont want to cuz an accident if it hit someones car.

zzp 2.9 pulley simmeons 60lb injectors stage 2 gm belt zzp wire harness Bkr7e 1 step plugs S3 Heat exchanger zzp dual pass end plate 3in down pipe mid length header sport tech Cai hi flow cat Wideban gauge zzp can tune.

more mods to come in the future

kstorm61 is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome