Chevy Cobalt Forum banner
Status
Not open for further replies.

Signal Lights Work but Won't Cancel After Turn

16K views 3 replies 3 participants last post by  agita_san 
#1 ·
I would like to replace the whole Turn Signal Headlight Switch as it looks like the whole assembly just plugs in and held by a top and bottom tab. The problem is that I do not know which parts need to be removed to access the switch.

Any help and direction on how to remove covers to access the light/headlight assembly switch would be fantastic!
 
#3 · (Edited)
I received this advice which might be helpful. My biggest concern was if the steering wheel would have to be removed and good news it doesn't. I ordered the switch and it will take a few weeks so I have not tried this yet. If anyone gets a chance to try this please post with what you find. Just to be safe, always disconnect the battery and allow 40 minutes to discharge before servicing.

You do not pull the wheel, do this.

1)Remove the instrument panel cluster trim plate bezel.
2)Remove the lower steering column trim cover bolts and remove the upper steering column trim cover.
3)Disconnect the turn signal multifunction switch electrical connectors.
4)Position the left lower steering column trim cover out of the way,
5)Depress the switch locking tabs and remove the turn signal multifunction switch.


Here is a nice link from Autozone with diagrams:

http://www.autozone.com/autozone/re...deContent.jsp?pageId=0996b43f8075d5ca#hd1-1-1
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top