Turn Signal Clicker Not Working. - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Problems and Service Talk about any mechanical problems you are having

 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 09-30-2011, 05:04 PM Thread Starter
Forum Regular
 
Join Date: Sep 2010
Location: Kentucky
Posts: 72
Turn Signal Clicker Not Working.

I have an 05 base coupe 5 speed and my turn signal clicker starting acting stupid today. The signals flash, but the clicker doesn't make any noise about half the time. The door chime still works and the front speakers work. Anybody had this problem before?

---------- Post added at 04:04 PM ---------- Previous post was at 03:53 PM ----------

Well, now my door chime just quit on me. I've read that on some Cobalts (06 and later?) the door chime and signal clicker run through the LF door speaker. Mine's an 05 and I've already replaced both door speakers.
BigBirdL61 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 09-30-2011, 06:25 PM
Newcomer
 
Join Date: Mar 2011
Location: Butler, PA
Posts: 43
I'd bet it's the speaker again. IIRC the problem is water getting into the door and ruining the speaker, so if water is still getting in, it is possible to keep happening.

Keep an ear on the audio. If it starts sounding like you have water in your left ear, it's the speaker.
07G5 is offline  
post #3 of 5 (permalink) Old 09-30-2011, 07:07 PM Thread Starter
Forum Regular
 
Join Date: Sep 2010
Location: Kentucky
Posts: 72
Music sounds fine from the door speaker. If I adjust the balance and fade all to the LF, it sounds fine. I just noticed that I can barely hear the door chime if I have my head up under the dash. It's faint. And nothing comes from the speaker unless the radio's on.
BigBirdL61 is offline  
 
post #4 of 5 (permalink) Old 10-01-2011, 01:30 PM
Forum Regular
 
Join Date: Jul 2011
Posts: 121
Garage
My chimes don't work either, door, signal, lights on warning.

Synergy1415P3 is offline  
post #5 of 5 (permalink) Old 01-24-2012, 07:32 PM
Forum Regular
 
jerseycobalt's Avatar
 
Join Date: Sep 2010
Location: brick,nj
Posts: 94
i just ran into the same problem is there anyway you can seal the inside of the door so that condensation and water cant get in... i know you can mat the door for sound purpose....what would you guys suggest cause i know its water
jerseycobalt is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome