Please Help. Re: Crankshaft Sensor - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Problems and Service Talk about any mechanical problems you are having

 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 07-15-2012, 05:03 PM Thread Starter
Newcomer
 
Join Date: Jul 2012
Posts: 9
Please Help. Re: Crankshaft Sensor

What tools would I need to pull out the Crankshaft Position Sensor??
airjrg is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 07-15-2012, 05:26 PM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage
What year, what engine?

Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
post #3 of 6 (permalink) Old 07-15-2012, 06:30 PM Thread Starter
Newcomer
 
Join Date: Jul 2012
Posts: 9
Sorry. 2009 LT 2.2Liter.
airjrg is offline  
 
post #4 of 6 (permalink) Old 07-15-2012, 08:23 PM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage
Server is slow tonight, sorry!!! You might need to have the ECM do a relearn after this change. Not sure I will check tomorrow, too tired tonight. Maybe server will be faster tomorrow.

Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
post #5 of 6 (permalink) Old 07-16-2012, 01:41 AM
Staff Alumni
 
money_man's Avatar
 
Join Date: Mar 2012
Location: Halifax, N.S
Posts: 3,127
wow, thats actually amazingly simple...why cant every engine be like this?

2009 Ford Escape Limited - 3.0L, 6 speed auto, 4x4, 25/33 city/hwy imp mpg.
2017 F150 XLT-XTR - 5.0L, 4x4, 3.55's, E-locker, xtr chrome package, fx4 off-road package.
20/25 imp mpg
money_man is offline  
post #6 of 6 (permalink) Old 07-16-2012, 04:02 AM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage
Crankshaft Position System Variation Learn
Note: The crankshaft position (CKP) system variation learn procedure is required when the following service procedures have been performed, regardless of whether DTC P0315 is set:

• Engine replacement

• Engine control module (ECM) replacement

• Crankshaft damper replacement

• Crankshaft replacement

• CKP sensor replacement

• Any engine repairs which disturb the crankshaft to CKP sensor relationship

---------- Post added at 08:02 AM ---------- Previous post was at 07:54 AM ----------

Procedure for CKP relearn.

Install a scan tool.
Monitor the ECM for DTCs with a scan tool. If other DTCs are set, except DTC P0315, refer to Diagnostic Trouble Code (DTC) List - Vehicle for the applicable DTC that set.
With a scan tool, select the CKP system variation learn procedure and perform the following:
3.1. Observe the fuel cut-off for the applicable engine.

3.2. Block the drive wheels.

3.3. Set the parking brake.

3.4. Place the vehicle's transmission in Park or Neutral.

3.5. Turn the air conditioning (A/C) OFF.

3.6. Cycle the ignition from OFF to ON.

3.7. Apply and hold the brake pedal for the duration of the procedure.

3.8. Start and idle the engine.

3.9. Accelerate to wide open throttle (WOT). The engine should not accelerate beyond the calibrated fuel cut-off RPM value noted in step 3.1. Release the throttle immediately if the value is exceeded.


Note: While the learn procedure is in progress, release the throttle immediately when the engine starts to decelerate. The engine control is returned to the operator and the engine responds to throttle position after the learn procedure is complete.


3.10. Release the throttle when fuel cut-off occurs.

The scan tool displays Learn Status: Learned this Ignition. If the scan tool indicates that DTC P0315 ran and passed, the CKP variation learn procedure is complete. If the scan tool indicates DTC P0315 failed or did not run, refer to DTC P0315. If any other DTCs set, refer to Diagnostic Trouble Code (DTC) List - Vehicle for the applicable DTC that set.
Turn OFF the ignition for 30 seconds after the learn procedure is completed successfully.

Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome