HELP!!! Cobalt Issue - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Problems and Service Talk about any mechanical problems you are having

 
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 04-29-2013, 07:28 PM Thread Starter
Newcomer
 
Join Date: Apr 2013
Posts: 1
Exclamation HELP!!! Cobalt Issue

Does the bcm have a ground, the guys just threw in the bcm in unbolted is there a ground not attached on the module? the car is flinging the same codes after being fixed. the codes are p0650 mil malfuntion, p0700 trans control, p0717 input shaft speed sensor a no signal. the trans control module has been replaced, the speed sensor as well. This must be an electrical problem. Any ideas????

Last edited by mandimurders1; 04-29-2013 at 07:30 PM.
mandimurders1 is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome