Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Go through the key FOB menu in your DIC. Read owners manual maybe????.
If your vehicle has remote start, this feature allows remote start to be turned off or on. Remote start allows you to start the engine from outside of the vehicle using your Remote Keyless Entry (RKE) transmitter. When REMOTE START appears on the display, press and hold the reset button for at least one second to scroll through the available settings:
OFF: The remote start feature will be disabled.
ON (default): The remote start feature will be enabled.
---------- Post added at 11:29 PM ---------- Previous post was at 11:14 PM ----------
To change feature settings, use the following procedure:
Entering Personalization Menu
Turn the ignition on while the vehicle is stopped.
To avoid excessive drain on the battery, it is recommended that the headlamps are turned off.
Press and hold the information and reset buttons at the same time for one second, then release to enter the personalization menu.
If the vehicle speed is greater than 2 mph (3 km/h), only the UNITS menu will be accessible.
Press the information button to scroll through the available personalization menu modes.
Press the reset button to scroll through the available settings for each mode.
If you do not make a selection within ten seconds, the display will go back to the previous information displayed.
Never drive faster than your guardian angel can fly
Last edited by Coby7; 07-10-2013 at 07:24 PM.