Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
It will go off on it's own but I can't remember if it's after 3 start-ups or after driving 100 miles without a problem. I will look that up for you.
---------- Post added at 03:25 PM ---------- Previous post was at 02:33 PM
Conditions for Clearing the MIL/DTC
• The control module turns OFF the malfunction indicator lamp (MIL) after 3 consecutive ignition cycles that the diagnostic runs and does not fail.
• A current DTC, Last Test Failed, clears when the diagnostic runs and passes.
• A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other emission related diagnostic.
• Clear the MIL and the DTC with a scan tool.
Never drive faster than your guardian angel can fly
Last edited by Coby7; 09-21-2013 at 11:24 AM.