Need to Replace Both Exhaust and Intake Camshaft Position Actuator Solenoid Valves? - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Problems and Service Talk about any mechanical problems you are having

 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 09-03-2017, 06:31 AM Thread Starter
Newcomer
 
Join Date: Aug 2017
Posts: 5
Need to Replace Both Exhaust and Intake Camshaft Position Actuator Solenoid Valves?

Just replaced the bad exhaust Camshaft Position Actuator Solenoid Valve (Genuine GM part #12655421).

https://www.yourcobalt.com/forums/pro...ve-change.html

And then measured the resistance across the two pins. The new exhaust one reads 12.2 ohms, and the old intake one reads 13 ohms.

The question is: Do I also need to replace the old intake Camshaft Position Actuator Solenoid Valve while the exhaust one was replaced.

Thanks!
kevin_ivy is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 09-18-2017, 01:23 PM
Newcomer
 
Join Date: Sep 2017
Posts: 1
Just did that and had same codes after replacing both camshaft sensors,fix was to replace variable timing solenoids valves intake and exhaust code gone and have not come back runs much better.note when took out badly gunked up so replaced both.
Stevekrutz is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome