I made these lights for my own car 2 years ago. They are modified from the smoked LED tails by K2 Motors, where I take the LED ring from a second set of the outer lights and put it into the inner lights. I also install a white LED bulb for backup lights.
Here's some pictures and videos. I make these to order, so please PM me if you're interested. After I receive the money I can have these done in about 2 weeks.
I'll include all wiring, connectors and a detailed description of how to hook them up.
The pictures below are of the base set. Again, these are made to order, but these pictures show what will be "in the box"!
Here is a short video of the lights in action:
Complete set (as pictured below), 4 fixtures, including all required wiring, flex tubing, and connectors: $350 shipped anywhere in the lower 48.
Plug-and-play harness for everything but the reverse lights: $50
This will allow you to simply plug the lights into the car's existing harness. Only two wires on each inner light need to be tied into the car's harness, for which I provide scotch lock connectors. The harness also includes resistors to fix "hyper flash".
Reverse lights in both inner AND outer lights: $100
Reason this is a fairly pricey option is that it basically double s the amount of work since I have to take apart both sets of outer lights in addition to the inners. As can be seen in this picture, this does result in great visibility:
Sequential tail lights (coming soon!)
Still working on a prototype for these, should be available by November!!
PM me if you're interested!