Anyone Use MOOG KCA382 Control Arm Caster Correction Kit
Just wondering if anyone ever used this kit. My caster is off about a difference of .83 degree
positive on the right side passenger side compared to the left side driver side . I read around that it is typical to have the caster set +.5 degrees more on the right side passenger side. But mine is about .8 degree positive there. I saw these and thought I could use this on the left side drivers side to give +.5 degree.
KCA382 Front Lower Control Arm Bushings - Inner Rear Position - Caster Correction Made By
KCA382 Whiteline Front Lower Control Arm Bushings - Inner Rear Position - Caster Correction
I didn't know these existed anybody use any of these before on their cobalt?
Last edited by AZBY; 09-30-2013 at 06:17 PM.