2006 Cobalt Auto Troubles - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Transmission All about the Chevy Cobalt Transmission

 
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 09-17-2019, 03:13 PM Thread Starter
Newcomer
 
Join Date: Sep 2019
Location: Fl
Posts: 3
2006 Cobalt Auto Troubles

Hello pep...
I have a problem with my Cobalt that has a 145k. The cars had no issue until yesterday when I tried to sell it. I drove it the location and the people jumped on and took them 20 min to test drive it. When they came back, the guy said the tranny is jerking. I said wooooooot... He said it jerks when taking off from 1st to 2nd only and when you come to a stop....and he was correct which I was shocked bc it's never done that. Cobalt jerks at taking off. Speedometer bounces only when coming to stop for 2 secs and driving again. That 2 secs make a jump to the needle. I check the trans output speed sensor for ohmmeter and it shows a 169.1 ohm. Turned the key on to check the volt and nothing shows. For the continuity nothing as well. How to tell if the sensor is bad?

Last edited by Vinny Stryke; 09-17-2019 at 03:16 PM.
Vinny Stryke is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 09-18-2019, 08:19 PM
Contributor
 
Join Date: Jul 2016
Posts: 466
You may find it easier and cheaper to just replace the sensor than to test it.
Check out “Hall effect transducer”
Or try
https://www.picoauto.com/library/aut...or-hall-effect

BC
1966tbird is offline  
Sponsored Links
Advertisement
 
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome