Wanted: Key Fob - Chevy Cobalt Forum / Cobalt Reviews / Cobalt SS / Cobalt Parts
Wanted (Car Related Only) Post what car-related parts you want to buy!

Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 13 (permalink) Old 03-29-2014, 08:59 PM Thread Starter
Contributor
 
Soaxin's Avatar
 
Join Date: Aug 2011
Posts: 402
Key Fob

I need a ket fob for my 07 ss


2007 SS/SC Lazer Blue Metallic. 2.90" pulley, 42# Injectors, K&N Typhoon Intake, Badmab Header, ZZP 3"dp, HPTuned, and Tsudo Muffler.
Soaxin is offline  
Sponsored Links
Advertisement
 
post #2 of 13 (permalink) Old 03-31-2014, 05:10 AM
Forum Regular
 
Join Date: Jun 2012
Location: kentucky
Posts: 91
If it has the chip in it you can get blank keys from eBay then just take it and have it cut

99 zr2 solid axle swap in progress
2006 Chevy Cobalt work car 282k and counting
2007 g6 gt family car
terry06 is offline  
post #3 of 13 (permalink) Old 03-31-2014, 07:05 AM
Forum Regular
 
Join Date: Feb 2014
Posts: 74
I found one at an O'Reilly's when mine needed replaced. You could try there.
FamilyMan is offline  
 
post #4 of 13 (permalink) Old 03-31-2014, 08:05 AM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage
I have lots of them for sale which one do you need the 15252034 ( non remote start) or the 22733524 (remote start)? $30 each.

---------- Post added at 11:05 AM ---------- Previous post was at 10:55 AM ----------

Or I can repair yours like new for cheaper and you won't need to get your Car programmed to a new remote unless you have a TechII. I've done a few for people on here no complaints yet.

Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
post #5 of 13 (permalink) Old 03-31-2014, 04:19 PM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage


Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
post #6 of 13 (permalink) Old 03-31-2014, 09:45 PM Thread Starter
Contributor
 
Soaxin's Avatar
 
Join Date: Aug 2011
Posts: 402
I need the non remote start one. I think the contacts on the rubber is shot because if I take out the chip and use a piece of metal and touch it to the contacts it works. So maybe a new rubber piece?


2007 SS/SC Lazer Blue Metallic. 2.90" pulley, 42# Injectors, K&N Typhoon Intake, Badmab Header, ZZP 3"dp, HPTuned, and Tsudo Muffler.
Soaxin is offline  
post #7 of 13 (permalink) Old 04-01-2014, 05:19 AM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage
That would be the 15252034. New button pad, clean contacts, make sure battery clip hasn't broken away from the board and you should be good.

https://www.yourcobalt.com/forums/ele...r-key-fob.html

Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
post #8 of 13 (permalink) Old 04-01-2014, 08:40 AM Thread Starter
Contributor
 
Soaxin's Avatar
 
Join Date: Aug 2011
Posts: 402
I re soldered the battery contact becuase it broke. So I fixed that issue. I tried cleaning the rubber with no luck.


2007 SS/SC Lazer Blue Metallic. 2.90" pulley, 42# Injectors, K&N Typhoon Intake, Badmab Header, ZZP 3"dp, HPTuned, and Tsudo Muffler.
Soaxin is offline  
post #9 of 13 (permalink) Old 04-01-2014, 09:34 AM
Super Moderator
YourCobalt.com Premium Member


 
Coby7's Avatar
 
Join Date: Oct 2011
Location: Magnetic Hill, New-Brunswick
Posts: 11,820
Garage
Punch out a few holes in metal duct tape and place it on the back of the button pad on the pods. This will hold you until you purchase a button pad.




Every minute spent angry is a happy minute lost for ever and ever!!!
Drives 2016 Cocoa Buick Encore 1.4L Turbo auto KL4CJDSB2GB652675
Drives 2016 Sunset Orange Trax LT1 1.4L Turbo auto 3GNCJPSB8GL142716

Never drive faster than your guardian angel can fly
Coby7 is offline  
post #10 of 13 (permalink) Old 04-01-2014, 09:36 AM Thread Starter
Contributor
 
Soaxin's Avatar
 
Join Date: Aug 2011
Posts: 402
Thanks thats a badass idea. The part number in you last post is that for a button pad


2007 SS/SC Lazer Blue Metallic. 2.90" pulley, 42# Injectors, K&N Typhoon Intake, Badmab Header, ZZP 3"dp, HPTuned, and Tsudo Muffler.
Soaxin is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome