Chevy Cobalt Forum banner

1 - 20 of 23 Posts

·
Registered
Joined
·
190 Posts
Discussion Starter #1 (Edited)

Full Interior LED Kit - Chevrolet Cobalt


At Diode Dynamics, we carry a full line of LED bulbs, to replace your map lights, license plate lights, vanity lights, trunk light, turn signals, fog lights, and more!

We carry the brightest, highest-quality bulbs at the lowest prices. Your order will ship same day, and we're here if you need us for support and service. And we do not raise prices to astronomical levels- We're breaking that market trend, and offering you great, low prices, every day. These LED bulbs are designed by us here in St. Louis, and every bulb carries with it a 3-year limited warranty.

Our LED Conversion Kits include all of the LED bulbs you need to replace the incandescent bulbs in your vehicle, for interior and license locations. It has been tested in your Cobalt, for perfect fitment, and no guesswork! No modification is required for installation, you simply replace the bulbs!


We are pleased to offer these LEDs in a truly customized way. You can create the kit that you prefer. Simply change the quantity to "0" for any bulbs that you do not wish to purchase.


By using the ordering options on this page, you can create your own mix-and-match kit by making the proper selections on each stage, or choose one whole kit that you prefer. The product pictures are professionally taken, at the same camera settings, in order to provide an accurate idea of what the bulbs will look like, in terms of brightness compared to the factory bulbs.


Brightness. We offer three levels of brightness, or "stages." All stages will provide a sharp, modern LED look, and all include the same number of bulbs. Please be sure to read all of the following information:
  • Stage 1: Near factory brightness.
  • Stage 2: Slightly brighter than factory.
  • Stage 3: Much brighter than factory.
  • Stage 4 Flexlight: (Trunk only) This is a flexible LED strip with connector, for plug-and-play installation. It replaces your factory trunk light, and can be positioned anywhere you would like, with included velcro and adhesive.
All brightness levels are for general reference only, and apply only to the use of white LEDs. Please see the note below regarding the use of colored LEDs.


Please note that the stage 3 trunk light is often an LED board, which must be installed directly on top of the trunk light housing to achieve maximum brightness. All other lights will fit inside of the light housing with no modification. Some stage 3 interior lights use direct-replacement adapters with an LED board for maximum brightness.


All products by Diode Dynamics are backed by a 30-day satisfaction guarantee and a 3-year limited warranty.



Need Info? Need to Order? Click Below!

2005-2010 Chevrolet Cobalt LED Conversion Kit






Need Info? Need to Order? Click Below!

2005-2010 Chevrolet Cobalt LED Conversion Kit

Questions? Send a PM or email [email protected] or call: (314) 205-3033


*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.
Diode Dynamics​
 

·
Registered
Joined
·
190 Posts
Discussion Starter #6
Do you have a complete interior kit for a 2015 Evo? I would like to get the interior kit for it. And probably the license plate lights for both the Evo and the Cobalt.
We have LED replacements for every location on both of your cars. Feel free to email us: [email protected] for more information

You might also check out our dealer locator to find a dealer in Colorado: Dealer Locator

Thanks,
Nick C.
 

·
Registered
Joined
·
190 Posts
Discussion Starter #9
do you have any other vendors you might work with that would have other colors available?
We have other color options available that may not be listed on the Cobalt-specific LED kit

Feel free to give us a call for more information: (314) 205-3033

Thank you!
Nick C.
 

·
Registered
Joined
·
134 Posts
I might be looking into these more as this year closes in.
 
  • Like
Reactions: Diode Dynamics

·
Registered
Joined
·
190 Posts
Discussion Starter #13
Your lights do not require a resistor in-line to function (for the turn signal lights for example)?
Turn signal locations will require either a replacement flasher or resistors to prevent hyperflash. No other location on your Cobalt will require resistors to be installed.

Thanks!
Nick C.
 
1 - 20 of 23 Posts
Top