Chevy Cobalt Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,312 Posts
If you are asking. If they will fit, Yes. They will fit but they are not as stiff as your forged aluminum control arms.
They will work while you get new bushings and lower ball joints and get your originals rebuilt

now if you have 08 FE5 LCAs then. No they will not fit.
You must check this out closely.
In 08 Chevy changed the diameter of the lower ball joint shaft…and the matching steering knuckles, the ball joint shaft slides up into.

sincce you have the FE1 LCAs in hand, measure the diameter of the ball joint shaft. Comparing this dimension to the ones in your 08 Sport.
 

·
Say What again!
Joined
·
14,327 Posts
The FE3 arms in the Sport should still have the old diameter of ball joint shaft. Personally I wouldn't downgrade to the FE1 arms.
 
  • Like
Reactions: 1966tbird
1 - 4 of 4 Posts
Top