Chevy Cobalt Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
CEL is on and I'm getting a P0013: "B" Camshaft Position Actuator Circuit (Bank 1), doing my research on the internet it has led me here.

I found this thread " http://www.yourcobalt.com/forums/problems-service/84402-p0013-p0014.html"

So I went to rockauto to find a replacement part and I get this:
http://www.rockauto.com/en/catalog/chevrolet,2010,cobalt,2.2l+l4,1444461,ignition,camshaft+position+sensor,7192

That does not look like the part in the other thread here so I'm getting confused

Did a little more reseach on rock auto and found this:
http://www.rockauto.com/en/catalog/chevrolet,2010,cobalt,2.2l+l4,1444461,engine,variable+valve+timing+solenoid+/+actuator,12910

So the question is: Which one do I need to order?

PS: Oil looks clean and full, on the console it say 69% on the oil

Thank you for any and all help.

Kelly
 

·
Super Moderator
Joined
·
11,821 Posts
Second one looks to be the right one. Only follow oil monitor if you use synthetic, otherwise 3000 mile interval.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top