Chevy Cobalt Forum banner

Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
2,724 Posts
Discussion Starter #1
I plan on installing a gauge and im going with the tinted gauge. I was originally going to tap into my dimmer switch for the 12v Dimmer (switched) Source but Glowshift recommends not to. Then i was going to tap into the shit knob PRNDIL light but was told it could blow a fuse. Can someone tune in and help me out.
 

·
Say What again!
Joined
·
6,037 Posts
Do the gauges not dim, is that why they don't want you to tap into a dimmer wire?
 

·
Registered
Joined
·
2,724 Posts
Discussion Starter #5
Do the gauges not dim, is that why they don't want you to tap into a dimmer wire?
im not sure it just has a note saying do not attach to a dimmer switch it will cause the gauge to run improperly.
 

·
Say What again!
Joined
·
6,037 Posts
It's probably not set up to dim..
 

·
Say What again!
Joined
·
6,037 Posts
My Auto Meters dim, just sayin
 

·
Say What again!
Joined
·
6,037 Posts
They were only like $80 a piece for my voltmeter and mechanical boost gauge.
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top